# 0.86 Unable to Calibrate

**URL:** https://forums.maslowcnc.com/t/0-86-unable-to-calibrate/22851
**Category:** Troubleshooting
**Tags:** calibration
**Created:** [December 1, 2024, 2:22am UTC](https://forums.maslowcnc.com/t/0-86-unable-to-calibrate/22851 "2024-12-01T02:22:00Z")
**Posts on this page:** 1
**Showing post:** 11

<div class="post-metadata">

### Author: ![kyleschoen](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/kyleschoen/32/26163_2.png) [@kyleschoen](https://forums.maslowcnc.com/u/kyleschoen)
#### Post date: [December 1, 2024, 11:55pm UTC](https://forums.maslowcnc.com/t/0-86-unable-to-calibrate/22851/11 "2024-12-01T23:55:54Z")

</div>

This got me past the 3x3 grid, thanks!

One note, when it would fail the fitness on the 3x3 was around 3.5 or something and now it finished the 3x3 at 2.3 which is odd.

---

_[View the full topic](https://forums.maslowcnc.com/t/0-86-unable-to-calibrate/22851)._