# 3/16 Aluminium plate - snowmobile bumper sides

**URL:** <https://forums.maslowcnc.com/t/3-16-aluminium-plate-snowmobile-bumper-sides/15303>\
**Category:** Projects\
**Created:** [November 24, 2020, 1:23pm UTC](https://forums.maslowcnc.com/t/3-16-aluminium-plate-snowmobile-bumper-sides/15303 "2020-11-24T13:23:58Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![RDHhybrid](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/rdhhybrid/32/18998_2.png) [@RDHhybrid](https://forums.maslowcnc.com/u/RDHhybrid)\
**Post date:** [November 24, 2020, 1:23pm UTC](https://forums.maslowcnc.com/t/3-16-aluminium-plate-snowmobile-bumper-sides/15303/1 "2020-11-24T13:23:59Z")

</div>

Hey all, thought I would post my success, cut the sides of a bumper I’m building for the wife’s sled(snowmobile). Previous methods were plasma, then grind and finish everything. This one will get a light file/buff where need and straight to sandblast/powder coat. I have to say, this is why I bought this, and it performed as advertised.

Details: Inner details - 300mm/min federate, 0.5 pass depth. Outer details - F360 1900mm/min, 1mm cut depth. It worked on the outside cuts. I would recommend a shallower cut depth of the 0.5mm with the F360 1/4 end mill feedrate. But it all turned out awesome. No cutting fluid or lube. May make a drip line for cutting oil but it worked fine so it’s good for now. Cut time was about 6 hours.

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/8/e/8ec547b389021d9ea5829321394fdf713c716b8e.jpeg) ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/3/f/3f426afdc73db39ff00a67b3386a8833b131db02.jpeg) ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/6/c/6cdc8e372c301dc13f4bc0c6401604b5d32d957e.jpeg) ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/6/5/65541bfb1b2ab8dc5a9ecba72b31cba13222e3cf.jpeg)

Own Rock Solid Powder Coating, that’s why there random txt in there. Lol

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [November 24, 2020, 1:33pm UTC](https://forums.maslowcnc.com/t/3-16-aluminium-plate-snowmobile-bumper-sides/15303/2 "2020-11-24T13:33:47Z")

</div>

Thanks for sharing the aluminum cut settings. Awesome to see that it worked!

---

<div class="post-metadata">

**Author:** ![David4784](https://avatars.discourse-cdn.com/v4/letter/d/9de0a6/32.png) [@David4784](https://forums.maslowcnc.com/u/David4784)\
**Post date:** [December 3, 2020, 9:49pm UTC](https://forums.maslowcnc.com/t/3-16-aluminium-plate-snowmobile-bumper-sides/15303/3 "2020-12-03T21:49:37Z")

</div>

What router and bits are you using?

---

<div class="post-metadata">

**Author:** ![Metalmaslow](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@Metalmaslow](https://forums.maslowcnc.com/u/Metalmaslow)\
**Post date:** [December 5, 2020, 3:07pm UTC](https://forums.maslowcnc.com/t/3-16-aluminium-plate-snowmobile-bumper-sides/15303/4 "2020-12-05T15:07:48Z")

</div>

looks nice. I bought an IV hospital drip bag to slowly drop some lube, but have not set it up yet.

---

<div class="post-metadata">

**Author:** ![RDHhybrid](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/rdhhybrid/32/18998_2.png) [@RDHhybrid](https://forums.maslowcnc.com/u/RDHhybrid)\
**Post date:** [December 10, 2020, 2:52pm UTC](https://forums.maslowcnc.com/t/3-16-aluminium-plate-snowmobile-bumper-sides/15303/5 "2020-12-10T14:52:19Z")

</div>

Thank you for the suggestion, I’ll get my hands on a IV bag and give it a go. 🙂 Also David, I used a 1/4" two flute end mill. up cut. Its made by Freud. Says its Industrial carbide. 20 bucks CAD where I live. My Router is a Mastercraft Maximum with my own lead screw Z Axis. I copied a members design so to speak, if you search mastercraft in the forums it comes up. However, I’m really looking at getting the M2 upgrade, my Z axis doesn’t seem to accurate because there is some play in the lead screw. It came from a trash compactor so, not really precision, 🙂

Edit: Forgot, I run the speed setting at about 4 for aluminium on the router, not wide open but close. Figured more RPM, smaller chips, not as hard on the cutter. Just a theory, probably got it backwards. LOL
