# 3D Printed Easy Z Home Jig

**URL:** <https://forums.maslowcnc.com/t/3d-printed-easy-z-home-jig/22293>\
**Category:** Hardware\
**Created:** [September 11, 2024, 1:32am UTC](https://forums.maslowcnc.com/t/3d-printed-easy-z-home-jig/22293 "2024-09-11T01:32:26Z")\
**Posts on this page:** 1\
**Showing post:** 21

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [January 5, 2025, 2:17am UTC](https://forums.maslowcnc.com/t/3d-printed-easy-z-home-jig/22293/21 "2025-01-05T02:17:42Z")

</div>

see

> [@Instructions - How To Make And Set Up A Z-Probe On The M4](https://forums.maslowcnc.com/t/instructions-how-to-make-and-set-up-a-z-probe-on-the-m4/22474):
>
> (UPDATED 2024.11.13 FOR FIRMWARE V0.85 CHANGES) A z-probe is a super handy addition to your M4 allowing you to accurately and quickly set the z-home position of your router bit on top of your material anytime that you are getting ready to make a cut. They are easy and cheap to make. This post is intended as a step-by-step walk-through of the process I used to build and configure a z-probe for my M4 (with photos for most steps). (Note, I have tried to make this walk-through as explicit and co…

David Lang

---

_[View the full topic](https://forums.maslowcnc.com/t/3d-printed-easy-z-home-jig/22293)._