# 4.1 Upgrade Screw Tip

**URL:** <https://forums.maslowcnc.com/t/4-1-upgrade-screw-tip/23691>\
**Category:** Hardware\
**Created:** [April 8, 2025, 3:04pm UTC](https://forums.maslowcnc.com/t/4-1-upgrade-screw-tip/23691 "2025-04-08T15:04:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![noiseislife](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/noiseislife/32/22834_2.png) [@noiseislife](https://forums.maslowcnc.com/u/noiseislife)\
**Post date:** [April 8, 2025, 3:04pm UTC](https://forums.maslowcnc.com/t/4-1-upgrade-screw-tip/23691/1 "2025-04-08T15:04:40Z")

</div>

If you’re struggling using the new black screws for screwing the arm halves together, as I was, use the old bolts instead. They are just slightly longer which allows them to engage with the nut much more reliably.
