# $400 - Maslow with metal ring and Z-axis -\[photos\]

**URL:** <https://forums.maslowcnc.com/t/400-maslow-with-metal-ring-and-z-axis-photos/9523>\
**Category:** Swap Meet\
**Created:** [April 12, 2019, 9:55pm UTC](https://forums.maslowcnc.com/t/400-maslow-with-metal-ring-and-z-axis-photos/9523 "2019-04-12T21:55:21Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![markmandp](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/markmandp/32/35_2.png) [@markmandp](https://forums.maslowcnc.com/u/markmandp)\
**Post date:** [April 12, 2019, 9:55pm UTC](https://forums.maslowcnc.com/t/400-maslow-with-metal-ring-and-z-axis-photos/9523/1 "2019-04-12T21:55:21Z")

</div>

I was able to setup and run my Maslow, but It took up too much space in my garage. My loss is your gain.

Ships from Northern California.

$400 firm.

Photos:

[[Album] Imgur ![](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/bf01888793ec6743f96b4ece4b133eb6b705f2da.jpeg "Imgur") ](https://imgur.com/a/jOTPsS6)

---

<div class="post-metadata">

**Author:** ![9knuckles](https://avatars.discourse-cdn.com/v4/letter/9/779978/32.png) [@9knuckles](https://forums.maslowcnc.com/u/9knuckles)\
**Post date:** [April 15, 2019, 4:11pm UTC](https://forums.maslowcnc.com/t/400-maslow-with-metal-ring-and-z-axis-photos/9523/2 "2019-04-15T16:11:24Z")

</div>

I’m very interested. What would be shipping to Utah?

---

<div class="post-metadata">

**Author:** ![markmandp](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/markmandp/32/35_2.png) [@markmandp](https://forums.maslowcnc.com/u/markmandp)\
**Post date:** [April 18, 2019, 10:54pm UTC](https://forums.maslowcnc.com/t/400-maslow-with-metal-ring-and-z-axis-photos/9523/3 "2019-04-18T22:54:30Z")

</div>

I’m not sure, but If you were ok with ground shipping, I bet it would be in the $20-40 range. I can’t use the original flat rate box because i would be shipping the new “ring” for centering.

Are you OK with $440 via paypal and then i can paypal you back the difference if shipping is less than $40?

---

<div class="post-metadata">

**Author:** ![9knuckles](https://avatars.discourse-cdn.com/v4/letter/9/779978/32.png) [@9knuckles](https://forums.maslowcnc.com/u/9knuckles)\
**Post date:** [April 19, 2019, 1:18am UTC](https://forums.maslowcnc.com/t/400-maslow-with-metal-ring-and-z-axis-photos/9523/4 "2019-04-19T01:18:17Z")

</div>

That is more than fair…

Unfortunately, just today I found out about a more pressing need for funds elsewhere. I guess I’ll step aside and wish you the best of luck. I’m sure someone will snatch this up right away!

Thanks.