# A drip guard for the top of the maslow 4 to protect it from water drips?

**URL:** <https://forums.maslowcnc.com/t/a-drip-guard-for-the-top-of-the-maslow-4-to-protect-it-from-water-drips/26106>\
**Category:** Projects\
**Created:** [August 9, 2026, 10:15pm UTC](https://forums.maslowcnc.com/t/a-drip-guard-for-the-top-of-the-maslow-4-to-protect-it-from-water-drips/26106 "2026-08-09T22:15:08Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![wouldchuck](https://avatars.discourse-cdn.com/v4/letter/w/58956e/32.png) [@wouldchuck](https://forums.maslowcnc.com/u/wouldchuck)\
**Post date:** [August 10, 2026, 1:29am UTC](https://forums.maslowcnc.com/t/a-drip-guard-for-the-top-of-the-maslow-4-to-protect-it-from-water-drips/26106/2 "2026-08-10T01:29:27Z")

</div>

I have been thinking about this for a while. I think the easiest would be a small umbrella tied to one of the maslow’s vertical supports. That or one of those umbrella hats.

I designed this rain and sun fly. It requires a bit of sewing.

 ![PXL_20260810_001700831](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/d/9/d963fb86fd4733edb5f92787a1bb88b4dd7a1450.jpeg)

> [@Maslow sun and rain fly. Maslow Hat](https://forums.maslowcnc.com/t/maslow-sun-and-rain-fly-maslow-hat/26107):
>
> I have been planning this for a while. Roughly knocked out a try today and it works great. Basic idea is to make a small kite inspired fly that attaches to the outsides of the maslow4 vertical supports. Materials: 2ft by 2ft square fabric so that you can cut a diagonal square out of the center of it. Fabric can be waterproof important to cut the fabric on the diagonal so that the stick pulls along the threads of the fabric 1 Stick about 20 inches long (fiberglass,…

---

_[View the full topic](https://forums.maslowcnc.com/t/a-drip-guard-for-the-top-of-the-maslow-4-to-protect-it-from-water-drips/26106)._