# About the Hardware category

**URL:** <https://forums.maslowcnc.com/t/about-the-hardware-category/18>\
**Category:** Hardware\
**Created:** [July 17, 2017, 9:12pm UTC](https://forums.maslowcnc.com/t/about-the-hardware-category/18 "2017-07-17T21:12:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [July 17, 2017, 9:12pm UTC](https://forums.maslowcnc.com/t/about-the-hardware-category/18/1 "2017-07-17T21:12:02Z")

</div>

This is the place to discuss the hardware aspect of Maslow CNC, including the motion system, control circuitry, support frame, sled and recommended routers.

Firmware and Ground Control issues should be posted over in Software Issues.

Follow these links to the Maslow CNC website or one of the Wiki pages to learn and contribute!  
**MaslowCNC [Assembly Guide](http://www.maslowcnc.com/assemblyguide/) | [Contact](http://www.maslowcnc.com/contact-us/) | [Contribute](http://www.maslowcnc.com/howtocontribute/) | [FAQ](http://www.maslowcnc.com/faq/) | [Issues](http://www.maslowcnc.com/howtofileanissue/) | [Source](https://github.com/MaslowCNC) | [Store](http://www.maslowcnc.com/store/) | [Weekly Updates](http://www.maslowcnc.com/weekly-updates/)**  
**Wiki:** [Electronics](https://github.com/MaslowCNC/Electronics/wiki) | [Firmware](https://github.com/MaslowCNC/Firmware/wiki) | [Mechanics](https://github.com/MaslowCNC/Mechanics/wiki) | [Software](https://github.com/MaslowCNC/GroundControl/wiki) | [Community Garden](https://github.com/MaslowCNC/CommunityGarden/wiki)

---

<div class="post-metadata">

**Author:** ![Hooper](https://avatars.discourse-cdn.com/v4/letter/h/c77e96/32.png) [@Hooper](https://forums.maslowcnc.com/u/Hooper)\
**Post date:** [October 27, 2018, 5:36pm UTC](https://forums.maslowcnc.com/t/about-the-hardware-category/18/3 "2018-10-27T17:36:13Z")

</div>

Bar,  
I didn’t receive a motor power cable with for the z-axis motor with my order. I sent and email to [info@maslowcnc.com](mailto:info@maslowcnc.com) and have not heard anything. My order # is 09668. It was shipped and received in late September. I would like to get started with the assembly but need that cable.  
Scott