# Adirondack chair **URL:** \ **Category:** Projects\ **Created:** [April 8, 2018, 5:36am UTC](https://forums.maslowcnc.com/t/adirondack-chair/3203 "2018-04-08T05:36:28Z")\ **Posts on this page:** 2\ **Page:** 2
**Author:** ![jaguar489](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@jaguar489](https://forums.maslowcnc.com/u/jaguar489)\ **Post date:** [July 4, 2019, 4:16am UTC](https://forums.maslowcnc.com/t/adirondack-chair/3203/21 "2019-07-04T04:16:25Z")
Yes that should work great thank you! ---
**Author:** ![Andy\_Fencer](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/andy_fencer/32/13461_2.png) [@Andy\_Fencer](https://forums.maslowcnc.com/u/Andy_Fencer)\ **Post date:** [July 4, 2019, 9:23pm UTC](https://forums.maslowcnc.com/t/adirondack-chair/3203/22 "2019-07-04T21:23:04Z")
Interesting topic, here are some thoughts: I would make a chair out of ACX 1/2" ply, it’s made for outdoors and very sturdy and takes staining or painting well. These chairs are designed to be hand cut, lots of straight lines. I would come up with a design that is a bit more elegant, there is a cool video [https://youtu.be/lQQmRq4Oqgo](https://youtu.be/lQQmRq4Oqgo) of a rockler challenge, with some clever chair designs that still look like Adirondack, but improve on the design. Also, I would cut it out of a full sheet with 1/4" bit and then use a round over bit on the same path, so you don’t have to sand much and get a really nice milled look. Screw holes should be cut as well, but cnc joinery would be even better. Once we have that deck built, I’ll give the design a try… There are probably some cool designs out there in 3D warehouse for SketchUp. [Previous page](https://forums.maslowcnc.com/t/adirondack-chair/3203.md?page=1)