# Adventure Awaits Cardinal Directions

**URL:** https://forums.maslowcnc.com/t/adventure-awaits-cardinal-directions/496
**Category:** Projects
**Created:** [August 20, 2017, 5:17pm UTC](https://forums.maslowcnc.com/t/adventure-awaits-cardinal-directions/496 "2017-08-20T17:17:35Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![jbnimble](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jbnimble/32/90_2.png) [@jbnimble](https://forums.maslowcnc.com/u/jbnimble)
#### Post date: [August 20, 2017, 5:17pm UTC](https://forums.maslowcnc.com/t/adventure-awaits-cardinal-directions/496/1 "2017-08-20T17:17:35Z")

</div>

I was working on a new table top with this design cutout, but then misjudged the size of the tables edges, and ran into a previously cut part of the plywood. The design is still good, so I cut it down to a wall hang size, and now it is time to paint.

I found the image online as a JPEG, used Inkscape (Trace Bitmap) to create the SVG and then JSCut to generate the GCode.

The original idea was a table for an RV that I designed using OpenSCAD to create the table form because it is an odd shape, but that will get cut when I get some more material. The eventual goal is to paint the design, and then put a resin layer for protection.

Luckily this neat design was salvageable.

 ![20170820_130020](https://yyz1.discourse-cdn.com/flex031/uploads/maslowcnc/original/1X/5de6dbb2b19331f56a7a3ea9676afd738018f73b.jpg)

Something that could maybe have made my life a little easier is if I could move the sled, and then mark within Ground Control the current location of the sled so I can give myself a better idea of were to Define Home and know that my piece will fit in between the jigsaw of cuts that I already have completed.