# Aeg Router collets **URL:** \ **Category:** Hardware\ **Created:** [February 7, 2020, 11:05pm UTC](https://forums.maslowcnc.com/t/aeg-router-collets/12330 "2020-02-07T23:05:14Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![drusso66](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@drusso66](https://forums.maslowcnc.com/u/drusso66)\ **Post date:** [February 7, 2020, 11:05pm UTC](https://forums.maslowcnc.com/t/aeg-router-collets/12330/1 "2020-02-07T23:05:14Z")
I am based in the UK and have just aquired a used AEG 1400 KE router, but it only has a 12mm collet. Would this be ok or would i need 8mm or 1/4 inch collet to setup my Maslow? I have tried searching for AEG collets but cannot seem to find any. ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [February 8, 2020, 12:01am UTC](https://forums.maslowcnc.com/t/aeg-router-collets/12330/2 "2020-02-08T00:01:51Z")
you need a collet that fits your bits. If you get 12mm shank bits, you will be fine as-is personally, I prefer to get the bits with the larger shanks rather than using an adapter. David Lang ---
**Author:** ![aluminumwelder](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aluminumwelder/32/9362_2.png) [@aluminumwelder](https://forums.maslowcnc.com/u/aluminumwelder)\ **Post date:** [February 8, 2020, 2:35am UTC](https://forums.maslowcnc.com/t/aeg-router-collets/12330/3 "2020-02-08T02:35:52Z")
---
**Author:** ![drusso66](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@drusso66](https://forums.maslowcnc.com/u/drusso66)\ **Post date:** [February 8, 2020, 9:49am UTC](https://forums.maslowcnc.com/t/aeg-router-collets/12330/4 "2020-02-08T09:49:34Z")
Great thanks for advice and video link