# All set up but now accuracy is weird

**URL:** <https://forums.maslowcnc.com/t/all-set-up-but-now-accuracy-is-weird/14670>\
**Category:** Troubleshooting\
**Tags:** accuracy\
**Created:** [September 16, 2020, 1:14am UTC](https://forums.maslowcnc.com/t/all-set-up-but-now-accuracy-is-weird/14670 "2020-09-16T01:14:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DavidRizzo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/davidrizzo/32/17860_2.png) [@DavidRizzo](https://forums.maslowcnc.com/u/DavidRizzo)\
**Post date:** [September 16, 2020, 1:14am UTC](https://forums.maslowcnc.com/t/all-set-up-but-now-accuracy-is-weird/14670/1 "2020-09-16T01:14:59Z")

</div>

I created a 4 inch by 4 inch square, then when I cut it, it came out 3.5" x 4.5". How can I tighten this up and reign it in? What settings should I be looking at?

---

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [September 16, 2020, 3:59am UTC](https://forums.maslowcnc.com/t/all-set-up-but-now-accuracy-is-weird/14670/2 "2020-09-16T03:59:09Z")

</div>

What frame, what Maslow, what hardware, what software and how did the calibration go?

---

<div class="post-metadata">

**Author:** ![DavidRizzo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/davidrizzo/32/17860_2.png) [@DavidRizzo](https://forums.maslowcnc.com/u/DavidRizzo)\
**Post date:** [September 16, 2020, 4:10am UTC](https://forums.maslowcnc.com/t/all-set-up-but-now-accuracy-is-weird/14670/3 "2020-09-16T04:10:44Z")

</div>

It’s resolved now, just had to rerun the calibration.