# Another trip to the hardware store?

**URL:** <https://forums.maslowcnc.com/t/another-trip-to-the-hardware-store/3257>\
**Category:** Hardware\
**Created:** [April 10, 2018, 8:50pm UTC](https://forums.maslowcnc.com/t/another-trip-to-the-hardware-store/3257 "2018-04-10T20:50:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AureliaSociety](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aureliasociety/32/3202_2.png) [@AureliaSociety](https://forums.maslowcnc.com/u/AureliaSociety)\
**Post date:** [April 10, 2018, 8:50pm UTC](https://forums.maslowcnc.com/t/another-trip-to-the-hardware-store/3257/1 "2018-04-10T20:50:30Z")

</div>

![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/f/f6bcf195eb0ae19d7e561e315304ddb1f7510cd2.jpeg)are these bolts not included? If not, what size are they so I can buy some, and they should also be added to the bill of materials.

---

<div class="post-metadata">

**Author:** ![Keith](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/keith/32/1332_2.png) [@Keith](https://forums.maslowcnc.com/u/Keith)\
**Post date:** [April 10, 2018, 8:54pm UTC](https://forums.maslowcnc.com/t/another-trip-to-the-hardware-store/3257/2 "2018-04-10T20:54:19Z")

</div>

Those are #10-32 threads on the stock Ridgid. Length will depend on the thickness of your sled which is part of why they aren’t included (another part being that not everyone uses the Ridgid router).

---

<div class="post-metadata">

**Author:** ![AureliaSociety](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aureliasociety/32/3202_2.png) [@AureliaSociety](https://forums.maslowcnc.com/u/AureliaSociety)\
**Post date:** [April 10, 2018, 8:55pm UTC](https://forums.maslowcnc.com/t/another-trip-to-the-hardware-store/3257/3 "2018-04-10T20:55:47Z")

</div>

Thank you, Keith. That makes sense.