# Anyone have an extra set of sprockets that go on ether side of the chain relief? **URL:** \ **Category:** Hardware\ **Created:** [May 4, 2020, 9:33pm UTC](https://forums.maslowcnc.com/t/anyone-have-an-extra-set-of-sprockets-that-go-on-ether-side-of-the-chain-relief/13209 "2020-05-04T21:33:31Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [May 5, 2020, 12:34am UTC](https://forums.maslowcnc.com/t/anyone-have-an-extra-set-of-sprockets-that-go-on-ether-side-of-the-chain-relief/13209/7 "2020-05-05T00:34:01Z")
here’s the simple setup I did > [@Weights for chain tension](https://forums.maslowcnc.com/t/weights-for-chain-tension/9718): > > I was having problems with the elastic cord not keeping enough tension on the slack and the chains twisting as a result, I made a quick trip to home depot and got the cloathsline pullys and a couple conduit sweeps, here is the result (works much better, but I need to relocate the end of the chain to handle the full work area) I didn’t bother relocating the metal pulleys from the old arrangement. the screw in the center is to hold the sled out of the way. the paracord seems to have no trouble w… David Lang --- _[View the full topic](https://forums.maslowcnc.com/t/anyone-have-an-extra-set-of-sprockets-that-go-on-ether-side-of-the-chain-relief/13209)._