# Arduino beeping

**URL:** <https://forums.maslowcnc.com/t/arduino-beeping/14544>\
**Category:** MakerMade\
**Created:** [September 4, 2020, 11:38am UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544 "2020-09-04T11:38:53Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Victor\_Martinez](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/victor_martinez/32/17501_2.png) [@Victor\_Martinez](https://forums.maslowcnc.com/u/Victor_Martinez)\
**Post date:** [September 4, 2020, 11:38am UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544/1 "2020-09-04T11:38:53Z")

</div>

Win 10 - M2 Maslow

is there a way to disable the constant beep form arduino, changing something in firmware maybe?

---

<div class="post-metadata">

**Author:** ![Metalmaslow](https://avatars.discourse-cdn.com/v4/letter/m/839c29/32.png) [@Metalmaslow](https://forums.maslowcnc.com/u/Metalmaslow)\
**Post date:** [September 4, 2020, 12:07pm UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544/2 "2020-09-04T12:07:20Z")

</div>

I think the motors are actually making that noise. You can try making a sound proof box around the motors perhaps? make sure there is decent air flow to keep them cool though.

---

<div class="post-metadata">

**Author:** ![Victor\_Martinez](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/victor_martinez/32/17501_2.png) [@Victor\_Martinez](https://forums.maslowcnc.com/u/Victor_Martinez)\
**Post date:** [September 4, 2020, 8:56pm UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544/3 "2020-09-04T20:56:11Z")

</div>

is an arduino beep, not motor. it changes sound when it’s charging info or when it’s stopped

---

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [September 4, 2020, 9:06pm UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544/4 "2020-09-04T21:06:58Z")

</div>

There is no sound module on the Arduino. Can you take a picture of the part that is beeping? It makes me worried if electronic parts that are not speakers make sound.

---

<div class="post-metadata">

**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\
**Post date:** [September 4, 2020, 9:11pm UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544/5 "2020-09-04T21:11:18Z")

</div>

A video would be a good diagnostic tool. I’m with @Gero, it shouldn’t make sound. Though if you can figure out how to control frequency, you can have the world’s first Musical Maslow! 😉

---

<div class="post-metadata">

**Author:** ![Victor\_Martinez](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/victor_martinez/32/17501_2.png) [@Victor\_Martinez](https://forums.maslowcnc.com/u/Victor_Martinez)\
**Post date:** [September 5, 2020, 7:27am UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544/6 "2020-09-05T07:27:05Z")

</div>

ok totally shame, it’s motor  
but motors do beep?

---

<div class="post-metadata">

**Author:** ![Enea](https://avatars.discourse-cdn.com/v4/letter/e/45deac/32.png) [@Enea](https://forums.maslowcnc.com/u/Enea)\
**Post date:** [September 5, 2020, 7:46am UTC](https://forums.maslowcnc.com/t/arduino-beeping/14544/8 "2020-09-05T07:46:07Z")

</div>

I believe it is the noise of the motors, it is as if arduino were feeding stepper motors, they make the same noise when they are stopped. I don’t understand the usefulness as the original Maslow didn’t happen