# Are there any other options for the Wiki? **URL:** \ **Category:** Site Feedback\ **Created:** [July 27, 2018, 12:48pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204 "2018-07-27T12:48:20Z")\ **Posts on this page:** 14\ **Page:** 2
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 14, 2018, 2:33pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/21 "2018-08-14T14:33:48Z")
# TEST (Only Testing) ## MaslowCNC Wiki - Hardware - Software - Troubleshooting And this is what a keyboard looks like ---
**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\ **Post date:** [August 14, 2018, 2:36pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/22 "2018-08-14T14:36:14Z")
Looks great… unfortunately, its for linux only at this time. And how do you use it here? Copy from the editor and paste here? ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 14, 2018, 2:38pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/23 "2018-08-14T14:38:00Z")
Yes, copy and paste. A few things might be different as for the headers I need to add a space for to work. The nesting part was my target to get to the information fast. Ah, ok… I clicked windows now and see what you mean. There is for sure something similar. ([http://pad.haroopress.com/user.html](http://pad.haroopress.com/user.html)) ---
**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\ **Post date:** [August 14, 2018, 2:57pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/24 "2018-08-14T14:57:39Z")
I updated the troubleshooting posts to make each issue its on reply in the thread. That gave me a means to link directly to that post. I kept the TOC simple using a basic markdown or whatever its called. I think this might work, just takes some time. ---
**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\ **Post date:** [August 17, 2018, 4:20pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/25 "2018-08-17T16:20:17Z")
Do you have to have a permission setting to allow you to make a post a wiki post? Someone replied to one of the wiki threads and was not able to set it as a wiki post (and therefore not able to be edited by others). ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 17, 2018, 6:04pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/26 "2018-08-17T18:04:41Z")
I have Admin and Moderator but can’t find how to > [@madgrizzle](#): > > set it as a wiki post I found it ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/1/1f2dc1c05637e14ca8b1582fd23d251c84508f7a.png) @madgrizzle where is the port you want to set? ---
**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\ **Post date:** [August 17, 2018, 6:40pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/27 "2018-08-17T18:40:56Z")
This is the post that I cannot set to being a wiki nor can the author of it. > [@Installing Bushings as an Inexpensive Fix for Z-Axis Slop on Ridgid R22002 Router](https://forums.maslowcnc.com/t/installing-bushings-as-an-inexpensive-fix-for-z-axis-slop-on-ridgid-r22002-router/5862/2): > > Be warned that you need to use a strong adhesive to connect the bushing or it will fail. I used 2P-10 (a type of wood super glue) and it failed after about a week). I had to break it down and redo it. The second time I used a $2 two part epoxy from Harbor Freight. This seems to be holding well. Note: 2P-10 is amazing for holding wood parts together when assembling. It is not cheap, but holds wood great and sets in seconds. I’m curious as to why I can make my posts a wiki but others cannot… that’s why I asked about permissions. ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 17, 2018, 7:34pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/28 "2018-08-17T19:34:40Z")
I’ve set it to wiki. Perhaps the trust level (yours 3)? I looked on the user page and you don’t have any visible special permissions 🙂 ---
**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\ **Post date:** [August 17, 2018, 7:37pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/29 "2018-08-17T19:37:35Z")
Thanks for looking into it. I have the wrench icon on my posts (post admin actions) that let me “Make Wiki” or “Remove Wiki”. Found this on discourse forum: > However normal users may also make their post Wiki, provided their trust level is high enough (by default TL3). Admins can change the trust level required with the site setting `min trust to allow self wiki` . I guess I could have googled it first 😉 ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 17, 2018, 7:41pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/30 "2018-08-17T19:41:02Z")
The person replying to the wiki has level 2. That would explain it. ---
**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\ **Post date:** [August 18, 2018, 12:54am UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/31 "2018-08-18T00:54:01Z")
If you are unable to make a post a wiki, you can flag it for the moderators. At the bottom of the post, select the flag icon: ![Screenshot%20from%202018-08-17%2020-36-15_mod](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/1/12aa5143c68b4da5e24c029825c13c53d35b43d2.png) Then choose “something else” and add your request in the message: ![Screenshot%20from%202018-08-17%2020-38-15](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/2/26cc2449bc8c769e53a100df041940cccaceaf51.png) ---
**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\ **Post date:** [August 18, 2018, 1:15am UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/32 "2018-08-18T01:15:24Z")
I’m not sure if this off topic or not, I run a pmwiki - It is where I have lots of the things I posted backed up. I like that it’s detached, if something happed to the Discourse, it runs independent. Wiki maintenance has a learning curve, yet another Mark-Up language to learn … However I wonder if the programming team couldn’t cook up a ML cross converter to move a post to a PMwiki. Just a thought. PMwiki is mature but not overly cumbersome in my opinion. The other thing is I like it could easily be cloned for offline use. Thank you ---
**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\ **Post date:** [August 18, 2018, 1:17am UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/33 "2018-08-18T01:17:45Z")
Interesting thought. Might be a good backup plan. I agree that learning another markup language wouldn’t be good. ---
**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\ **Post date:** [August 18, 2018, 1:19am UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/34 "2018-08-18T01:19:18Z")
I think of Wiki as a diffrent arena - Cliff notes- FWW [Previous page](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204.md?page=1)