# Are there any other options for the Wiki? **URL:** \ **Category:** Site Feedback\ **Created:** [July 27, 2018, 12:48pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204 "2018-07-27T12:48:20Z")\ **Posts on this page:** 1\ **Showing post:** 27
**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\ **Post date:** [August 17, 2018, 6:40pm UTC](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204/27 "2018-08-17T18:40:56Z")
This is the post that I cannot set to being a wiki nor can the author of it. > [@Installing Bushings as an Inexpensive Fix for Z-Axis Slop on Ridgid R22002 Router](https://forums.maslowcnc.com/t/installing-bushings-as-an-inexpensive-fix-for-z-axis-slop-on-ridgid-r22002-router/5862/2): > > Be warned that you need to use a strong adhesive to connect the bushing or it will fail. I used 2P-10 (a type of wood super glue) and it failed after about a week). I had to break it down and redo it. The second time I used a $2 two part epoxy from Harbor Freight. This seems to be holding well. Note: 2P-10 is amazing for holding wood parts together when assembling. It is not cheap, but holds wood great and sets in seconds. I’m curious as to why I can make my posts a wiki but others cannot… that’s why I asked about permissions. --- _[View the full topic](https://forums.maslowcnc.com/t/are-there-any-other-options-for-the-wiki/5204)._