# Assembling Maslow 4 kit

**URL:** <https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356>\
**Category:** Technical Details\
**Created:** [March 25, 2024, 11:55pm UTC](https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356 "2024-03-25T23:55:00Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [March 25, 2024, 11:55pm UTC](https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356/1 "2024-03-25T23:55:00Z")

</div>

Kit Delivered yesterday. No parts damaged or missing, Screws etc still packed.  
Suggest putting bolt in to hold captive nuts on arms initially to prevent nut falling out when putting motor on arm. Just don’t forget to take them out before assembling arm!

 ![20240325_124650](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/a/b/ab32853995bd4e25ad8ee959de1f87bbaee4bcf5.jpeg)  
And now onto the next bit.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 26, 2024, 12:05am UTC](https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356/2 "2024-03-26T00:05:12Z")

</div>

That is an excellent suggestion. If we had an additional step to remind folks to take them out at the appropriate time that might not be too much of an issue.

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [March 26, 2024, 12:22am UTC](https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356/3 "2024-03-26T00:22:49Z")

</div>

yeah, I did that and forgot to pull them out at the right time on 3 of the 4  
arms ☹

David Lang

---

<div class="post-metadata">

**Author:** ![c00nphrog](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/c00nphrog/32/13632_2.png) [@c00nphrog](https://forums.maslowcnc.com/u/c00nphrog)\
**Post date:** [March 26, 2024, 2:12am UTC](https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356/4 "2024-03-26T02:12:23Z")

</div>

I just added a drop of the super glue on one of the edges of the nuts to hold them in place…worked pretty good!!

---

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [March 26, 2024, 4:00am UTC](https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356/5 "2024-03-26T04:00:34Z")

</div>

Only forgot once, on the last one. Still better than finding out you dropped one of the nuts after assembling the motor, which I did on the 1st.

---

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [March 26, 2024, 4:12am UTC](https://forums.maslowcnc.com/t/assembling-maslow-4-kit/20356/6 "2024-03-26T04:12:12Z")

</div>

I really appreciate the step by step guide. Thanks