# Biplane **URL:** \ **Category:** Maslow Community\ **Created:** [August 31, 2018, 2:18pm UTC](https://forums.maslowcnc.com/t/biplane/6285 "2018-08-31T14:18:02Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![GardenRobot](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gardenrobot/32/8571_2.png) [@GardenRobot](https://forums.maslowcnc.com/u/GardenRobot)\ **Post date:** [August 31, 2018, 2:18pm UTC](https://forums.maslowcnc.com/t/biplane/6285/1 "2018-08-31T14:18:02Z")
* * * This is a companion discussion topic for the original entry at [http://maslowcommunitygarden.org/Biplane.html](http://maslowcommunitygarden.org/Biplane.html) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 31, 2018, 2:23pm UTC](https://forums.maslowcnc.com/t/biplane/6285/2 "2018-08-31T14:23:47Z")
no files, no picture ☹ ---
**Author:** ![Sreenigne](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Sreenigne](https://forums.maslowcnc.com/u/Sreenigne)\ **Post date:** [August 31, 2018, 2:26pm UTC](https://forums.maslowcnc.com/t/biplane/6285/3 "2018-08-31T14:26:22Z")
Don’t know what happened. Having issues getting thing into the garden. Someone want to help? I uploaded the description, image and the files in (zip format). The log said everything was uploaded fine. Not sure what has happened. ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 31, 2018, 2:29pm UTC](https://forums.maslowcnc.com/t/biplane/6285/4 "2018-08-31T14:29:55Z")
Are you signed in github uploading the files, or are you attempting to create a github account in the process? ---
**Author:** ![Sreenigne](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Sreenigne](https://forums.maslowcnc.com/u/Sreenigne)\ **Post date:** [August 31, 2018, 2:30pm UTC](https://forums.maslowcnc.com/t/biplane/6285/5 "2018-08-31T14:30:49Z")
Was doing it through the garden direct. I am not getting into Github to see if I can update things from there. ---
**Author:** ![Sreenigne](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Sreenigne](https://forums.maslowcnc.com/u/Sreenigne)\ **Post date:** [August 31, 2018, 2:34pm UTC](https://forums.maslowcnc.com/t/biplane/6285/6 "2018-08-31T14:34:57Z")
Github will not let me change anything as the author. It does not recognize this as my project. I had to create a Github log in after the original upload using the Garden portal. Can this project be deleted from the Garden and re uploaded by others? ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [August 31, 2018, 2:43pm UTC](https://forums.maslowcnc.com/t/biplane/6285/7 "2018-08-31T14:43:23Z")
Looks like something is wrong in the creation process. I was successful with logging into github with my created account there and then doing the garden upload. ---
**Author:** ![Sreenigne](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Sreenigne](https://forums.maslowcnc.com/u/Sreenigne)\ **Post date:** [August 31, 2018, 2:54pm UTC](https://forums.maslowcnc.com/t/biplane/6285/8 "2018-08-31T14:54:16Z")
Just tried and it will not let me upload. Send me your email and I will send you the files directly while we get it figured out… ---
**Author:** ![Sreenigne](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Sreenigne](https://forums.maslowcnc.com/u/Sreenigne)\ **Post date:** [August 31, 2018, 3:45pm UTC](https://forums.maslowcnc.com/t/biplane/6285/9 "2018-08-31T15:45:46Z")
I give up on the Garden and Github. I must be too stupid to figure it out. I tried to upload into github. It went in as a “patch” not into original and will not show in Garden. Anyone wanting these files can contact me via forum email and I will send them to you. @bar if you can assist me I would appreciate it. ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [August 31, 2018, 4:05pm UTC](https://forums.maslowcnc.com/t/biplane/6285/10 "2018-08-31T16:05:41Z")
Yes! Sorry for the trouble. I really need to make it less finicky and better at saying what happened when something goes wrong. Will you email the files you want uploaded to [bar@maslowcnc.com](mailto:bar@maslowcnc.com) or attach them here if they will fit. I can put them up right away ---
**Author:** ![Sreenigne](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Sreenigne](https://forums.maslowcnc.com/u/Sreenigne)\ **Post date:** [August 31, 2018, 4:19pm UTC](https://forums.maslowcnc.com/t/biplane/6285/11 "2018-08-31T16:19:59Z")
Post removed. Files being added to Garden. ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [August 31, 2018, 4:27pm UTC](https://forums.maslowcnc.com/t/biplane/6285/12 "2018-08-31T16:27:15Z")
I think what went wrong was that the file was .jpeg which the checker recognized as a valid image file, but then it really wants .jpg which caused everything to break down. That’s a bug for sure, I’ll see if I can make it more robust, sorry for the trouble! ---
**Author:** ![Sreenigne](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@Sreenigne](https://forums.maslowcnc.com/u/Sreenigne)\ **Post date:** [August 31, 2018, 5:02pm UTC](https://forums.maslowcnc.com/t/biplane/6285/13 "2018-08-31T17:02:05Z")
Thanks for getting this fixed for me. I really wanted to share something with the community. :)😀 ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [August 31, 2018, 5:42pm UTC](https://forums.maslowcnc.com/t/biplane/6285/14 "2018-08-31T17:42:58Z")
Thanks for sharing something awesome! Sorry for the trouble! ---
**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\ **Post date:** [September 1, 2018, 9:02pm UTC](https://forums.maslowcnc.com/t/biplane/6285/15 "2018-09-01T21:02:38Z")
![](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/2/2dc8f19ea93da457616c8b61682cd425ff4b8343.jpeg)