# Boat Builders Projects **URL:** \ **Category:** Projects\ **Created:** [February 28, 2018, 7:51pm UTC](https://forums.maslowcnc.com/t/boat-builders-projects/2536 "2018-02-28T19:51:11Z")\ **Posts on this page:** 1\ **Showing post:** 199
**Author:** ![Curtis2010](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@Curtis2010](https://forums.maslowcnc.com/u/Curtis2010)\ **Post date:** [October 8, 2024, 6:54pm UTC](https://forums.maslowcnc.com/t/boat-builders-projects/2536/199 "2024-10-08T18:54:58Z")
Old thread, but here is a link to my Unicat 2.4 build using a Maslow CNC. > [@Boat Build: Unicat 2.4](https://forums.maslowcnc.com/t/boat-build-unicat-2-4/15636): > > My old dinghy (a RIB) is at the end of its service life. So, I decided to build a new dinghy using the Maslow. This was actually one of my justifications for building a Maslow in the first place. The panels for the boat are cut from 5mm plywood using a 1/8" bit. The Maslow is doing an excellent job of cutting them. I’m able to get within about 3" of the edges without any problems. Only the lower right corner has some accuracy issues. Overall I am very pleased with how it is cutting. Pic for so… --- _[View the full topic](https://forums.maslowcnc.com/t/boat-builders-projects/2536)._