# Build it and they will Come

**URL:** <https://forums.maslowcnc.com/t/build-it-and-they-will-come/12148>\
**Category:** Hardware\
**Created:** [January 12, 2020, 11:59pm UTC](https://forums.maslowcnc.com/t/build-it-and-they-will-come/12148 "2020-01-12T23:59:45Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SnowCrash](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@SnowCrash](https://forums.maslowcnc.com/u/SnowCrash)\
**Post date:** [January 12, 2020, 11:59pm UTC](https://forums.maslowcnc.com/t/build-it-and-they-will-come/12148/1 "2020-01-12T23:59:45Z")

</div>

Dlang. You guys should add this setup to the shop. I would buy it, looks like an excellent upgrade to the z axis kit, I know I’ve personally noticed alot of play while trying to zero the bit before a cut, this is an excellent build and should be commercialized as an upgrade. [The Beefy Z-Axis](https://forums.maslowcnc.com/t/the-beefy-z-axis/6704)