# Building a Bolger Bobcat (Payson Tiny Cat) catboat from CAD on up

**URL:** <https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851>\
**Category:** Projects\
**Created:** [January 10, 2018, 9:31pm UTC](https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851 "2018-01-10T21:31:28Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Sonny\_Lacey](https://avatars.discourse-cdn.com/v4/letter/s/e480ec/32.png) [@Sonny\_Lacey](https://forums.maslowcnc.com/u/Sonny_Lacey)\
**Post date:** [January 10, 2018, 9:42pm UTC](https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851/8 "2018-01-10T21:42:20Z")

</div>

I have done quite a few stitch and glue projects: a 17’ sailboat, a few kayaks, a stand up paddleboard, and now this 12’ catboat. I, personally, love the method! I cannot say enough about modern epoxy and also about just using plain 'ol fine sawdust from your dust collector for making the seam putty.

---

_[View the full topic](https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851)._