# Building a Bolger Bobcat (Payson Tiny Cat) catboat from CAD on up

**URL:** https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851
**Category:** Projects
**Created:** [January 10, 2018, 9:31pm UTC](https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851 "2018-01-10T21:31:28Z")
**Posts on this page:** 1
**Showing post:** 93

<div class="post-metadata">

### Author: ![MidnightMaker](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/midnightmaker/32/2397_2.png) [@MidnightMaker](https://forums.maslowcnc.com/u/MidnightMaker)
#### Post date: [July 26, 2018, 1:40am UTC](https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851/93 "2018-07-26T01:40:01Z")

</div>

If you like this awesome thread, you should check out this one:

> [@Boat Builders Projects](https://forums.maslowcnc.com/t/boat-builders-projects/2536):
>
> There was a suggestion to start a thread for all the boat builders - So here it is. If your building a boat tell us about it here.

I’m 95% done with a CLC Passagemaker dinghy at almost exactly 200 hours. In fact, just finished sewing my main sail kit from Sailrite. Tomorrow, I’m lacing the sail to the spars to determine where to mount the hardware on the wooden mast.

P.S. Thanks again @Sonny_Lacey for sharing!

---

_[View the full topic](https://forums.maslowcnc.com/t/building-a-bolger-bobcat-payson-tiny-cat-catboat-from-cad-on-up/1851)._