# Building a Maslow using a TinyG and Stepper motors

**URL:** <https://forums.maslowcnc.com/t/building-a-maslow-using-a-tinyg-and-stepper-motors/399>\
**Category:** Projects\
**Created:** [August 7, 2017, 10:45am UTC](https://forums.maslowcnc.com/t/building-a-maslow-using-a-tinyg-and-stepper-motors/399 "2017-08-07T10:45:01Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [August 7, 2017, 10:53am UTC](https://forums.maslowcnc.com/t/building-a-maslow-using-a-tinyg-and-stepper-motors/399/2 "2017-08-07T10:53:52Z")

</div>

[http://forums.maslowcnc.com/t/building-a-maslow-with-stepper-motors/168](http://forums.maslowcnc.com/t/building-a-maslow-with-stepper-motors/168)  
[http://www.maslowcnc.com/oldforums#!/general:stepper-motor-with-gearbox](http://www.maslowcnc.com/oldforums#!/general:stepper-motor-with-gearbox)  
The fork on GitHub seems to be bit quiet:  
[https://github.com/algobasket/MaslowCNC-Stepper-Motor-Firmware](https://github.com/algobasket/MaslowCNC-Stepper-Motor-Firmware)

---

_[View the full topic](https://forums.maslowcnc.com/t/building-a-maslow-using-a-tinyg-and-stepper-motors/399)._