# Calibration Experience Report

**URL:** <https://forums.maslowcnc.com/t/calibration-experience-report/21790>\
**Category:** Troubleshooting\
**Created:** [July 7, 2024, 1:41pm UTC](https://forums.maslowcnc.com/t/calibration-experience-report/21790 "2024-07-07T13:41:55Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![Carson\_Barry](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/carson_barry/32/23367_2.png) [@Carson\_Barry](https://forums.maslowcnc.com/u/Carson_Barry)\
**Post date:** [July 13, 2024, 4:00pm UTC](https://forums.maslowcnc.com/t/calibration-experience-report/21790/10 "2024-07-13T16:00:24Z")

</div>

iirc, it’s improved with updates, but you should still expect some belt slack during the first part of calibration and, especially if horizontal, have to tend the belts during that time to keep the slack outside of the spool assemblies.

---

_[View the full topic](https://forums.maslowcnc.com/t/calibration-experience-report/21790)._