# Calibration, off center and skewed

**URL:** <https://forums.maslowcnc.com/t/calibration-off-center-and-skewed/16999>\
**Category:** Uncategorized\
**Created:** [August 13, 2021, 4:46pm UTC](https://forums.maslowcnc.com/t/calibration-off-center-and-skewed/16999 "2021-08-13T16:46:34Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [August 15, 2021, 1:10pm UTC](https://forums.maslowcnc.com/t/calibration-off-center-and-skewed/16999/5 "2021-08-15T13:10:32Z")

</div>

the more accurate you can be with the motor-shaft-to-workpiece-height (Y offset/beam height) and your motor to motor spacing (from 8:00 on left sprocket to 4:00 on right sprocket), the more accurate things will be. Remember you are trying to tell or get the machine to learn its location more precisely.

[![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/5/a/5ad108b9fa2b15a8e5db2c577d1091cf336da278.png)](https://forums.maslowcnc.com/t/the-maslow-manual-v-0-001/12368/2)

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/c/2/c23dd1285f390976264eaaa278274f017106d2bc.png)

---

_[View the full topic](https://forums.maslowcnc.com/t/calibration-off-center-and-skewed/16999)._