# Calibration problem with version 80 of M4

**URL:** <https://forums.maslowcnc.com/t/calibration-problem-with-version-80-of-m4/21834>\
**Category:** Troubleshooting\
**Tags:** calibration\
**Created:** [July 12, 2024, 6:35am UTC](https://forums.maslowcnc.com/t/calibration-problem-with-version-80-of-m4/21834 "2024-07-12T06:35:04Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [July 12, 2024, 9:30pm UTC](https://forums.maslowcnc.com/t/calibration-problem-with-version-80-of-m4/21834/6 "2024-07-12T21:30:07Z")

</div>

@ian_ab, will you give this index.html file a try and let me know if it works for you?

> [@Interstitial Firmware Releases](https://forums.maslowcnc.com/t/interstitial-firmware-releases/20215/216):
>
> Here are just a couple fixes to last week’s update.

I just tested it on my machine and it seems good to me

---

_[View the full topic](https://forums.maslowcnc.com/t/calibration-problem-with-version-80-of-m4/21834)._