# Calibration process does not match FluidNC v3.0.x maslow4

**URL:** <https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082>\
**Category:** Site Feedback\
**Created:** [March 8, 2024, 9:02pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082 "2024-03-08T21:02:49Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![JDogHerman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jdogherman/32/38_2.png) [@JDogHerman](https://forums.maslowcnc.com/u/JDogHerman)\
**Post date:** [March 8, 2024, 9:02pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082/1 "2024-03-08T21:02:49Z")

</div>

I updated the firmware from the github from [Releases · BarbourSmith/FluidNC · GitHub](https://github.com/BarbourSmith/FluidNC/releases) v0.63

The calibration process does not seem to match the existing documentation in the user guide.

> **[User Guide — Maslow](https://www.maslowcnc.com/user-guide)**

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 8, 2024, 9:21pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082/2 "2024-03-08T21:21:18Z")

</div>

Did you update the index.html file too? It is the index.html file which sets how things look.

---

<div class="post-metadata">

**Author:** ![JDogHerman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jdogherman/32/38_2.png) [@JDogHerman](https://forums.maslowcnc.com/u/JDogHerman)\
**Post date:** [March 8, 2024, 9:23pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082/3 "2024-03-08T21:23:59Z")

</div>

that did it! Thanks

---

<div class="post-metadata">

**Author:** ![JDogHerman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jdogherman/32/38_2.png) [@JDogHerman](https://forums.maslowcnc.com/u/JDogHerman)\
**Post date:** [March 8, 2024, 9:42pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082/4 "2024-03-08T21:42:34Z")

</div>

Is there a version number we can check on the index.html files from the UI so we can make sure we are on the newest version without overwriting the old?

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 8, 2024, 9:47pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082/5 "2024-03-08T21:47:26Z")

</div>

Unfortunately not. I like the idea of having one though. It wouldn’t be too hard to add.

---

<div class="post-metadata">

**Author:** ![JDogHerman](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jdogherman/32/38_2.png) [@JDogHerman](https://forums.maslowcnc.com/u/JDogHerman)\
**Post date:** [March 8, 2024, 9:49pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082/6 "2024-03-08T21:49:14Z")

</div>

Should I post this as feature request to the repo?

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 8, 2024, 10:05pm UTC](https://forums.maslowcnc.com/t/calibration-process-does-not-match-fluidnc-v3-0-x-maslow4/20082/7 "2024-03-08T22:05:50Z")

</div>

Yes, absolutely. Open an issue for it.