# Can someone Zoom, and help me, or Create the G-Code and then help me at another time? **URL:** \ **Category:** Uncategorized\ **Created:** [May 18, 2024, 6:33pm UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087 "2024-05-18T18:33:53Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![GESDesigns](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gesdesigns/32/23728_2.png) [@GESDesigns](https://forums.maslowcnc.com/u/GESDesigns)\ **Post date:** [May 18, 2024, 6:33pm UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/1 "2024-05-18T18:33:53Z")
I am having a Yard sale tomorrow and I would like to try to cut some Flags for tomorrow. I have the Files for the flags, I just need to figure out how to set up the Files in Krabz or EstleCam. I have a V-groove Bit, and a 1/8th" straight bit. The boards that I have are 16x48, so If I can get 2 Flags per board that would be even better. and I have 3 boards. These are the ones I would like to make. ![We the people flag etsy](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/4/b/4b71e007c5a000e0694781a332ccf156a98c6e25.svg) [1776 flag.dxf](https://forums.maslowcnc.com/uploads/short-url/1hW8iU9PTCtJG2R4YExm7cLGuxs.dxf) (295.6 KB) [2nd amendment.dxf](https://forums.maslowcnc.com/uploads/short-url/atdGU0NijpLdfacGE7tMx26mayG.dxf) (3.9 MB) [United We Stand Flag.dxf](https://forums.maslowcnc.com/uploads/short-url/cI3NgkBsTB9mTPE5uc234LFWkEW.dxf) (263.0 KB) ![20240518_142538](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/c/b/cb332456d1eedac001f18d8a4d634925e82f17d6.jpeg) ![20240518_142554](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/6/d/6d3c218bf8b2a38c0f7c74e27e8b8773969c8268.jpeg) ---
**Author:** ![GESDesigns](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gesdesigns/32/23728_2.png) [@GESDesigns](https://forums.maslowcnc.com/u/GESDesigns)\ **Post date:** [May 18, 2024, 6:34pm UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/2 "2024-05-18T18:34:27Z")
[we the people flag etsy.dxf](https://forums.maslowcnc.com/uploads/short-url/27WK3plXBE5CyXZAlRqCVXycEDo.dxf) (930.6 KB) ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [May 19, 2024, 2:15am UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/4 "2024-05-19T02:15:51Z")
deleted as the post this replied to was also deleted ---
**Author:** ![GESDesigns](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gesdesigns/32/23728_2.png) [@GESDesigns](https://forums.maslowcnc.com/u/GESDesigns)\ **Post date:** [May 19, 2024, 9:57am UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/5 "2024-05-19T09:57:55Z")
That post was deleted. That was a stressed out post after smoking a bit, and trying to figure out what I’m doing. Spent 4 hours Friday, and all day Saturday working on trying to figure out what I’m doing. Then my wife started in on shit and put me over the top. That’s where that came from. And one i called down i deleted that post. ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [May 19, 2024, 10:45am UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/6 "2024-05-19T10:45:22Z")
I deleted my reply as well, I normally read and reply via email, so if you edit/delete your post I may not see the change. ---
**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\ **Post date:** [May 19, 2024, 6:04pm UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/7 "2024-05-19T18:04:41Z")
So are you still looking for someone to Zoom with you and try to figure this out? I haven’t even started my first M4 cut, so I’m probably not your best bet, but I suspect there’s someone out there who could help you out. ---
**Author:** ![TimS](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/tims/32/17329_2.png) [@TimS](https://forums.maslowcnc.com/u/TimS)\ **Post date:** [May 19, 2024, 6:53pm UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/8 "2024-05-19T18:53:44Z")
> **[Download Carbide Create V6](https://carbide3d.com/carbidecreate/download6)** > > Download the prior version of Carbide Create, V6, here. This is FREE, easy to learn, and has alot of videos on it’s website and YouTube. ---
**Author:** ![GESDesigns](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gesdesigns/32/23728_2.png) [@GESDesigns](https://forums.maslowcnc.com/u/GESDesigns)\ **Post date:** [May 19, 2024, 11:58pm UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/9 "2024-05-19T23:58:13Z")
absolutely. I would really love someone to be able to show me how to do all this ---
**Author:** ![Gijs](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gijs/32/24049_2.png) [@Gijs](https://forums.maslowcnc.com/u/Gijs)\ **Post date:** [May 20, 2024, 8:10am UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/10 "2024-05-20T08:10:45Z")
Thanks Carbide looks like a nice simple tool to use! ---
**Author:** ![Byron\_Abbey](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/byron_abbey/32/22252_2.png) [@Byron\_Abbey](https://forums.maslowcnc.com/u/Byron_Abbey)\ **Post date:** [June 9, 2025, 1:16am UTC](https://forums.maslowcnc.com/t/can-someone-zoom-and-help-me-or-create-the-g-code-and-then-help-me-at-another-time/21087/11 "2025-06-09T01:16:37Z")
any chance you can help me out aswell? I am stuck at the part after exoprting the .nc file and importing it into fluid