# Can the Maslow 4 be used for flattening?

**URL:** <https://forums.maslowcnc.com/t/can-the-maslow-4-be-used-for-flattening/19089>\
**Category:** Technical Details\
**Created:** [August 2, 2023, 3:39pm UTC](https://forums.maslowcnc.com/t/can-the-maslow-4-be-used-for-flattening/19089 "2023-08-02T15:39:45Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Mike](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@Mike](https://forums.maslowcnc.com/u/Mike)\
**Post date:** [August 4, 2023, 5:43pm UTC](https://forums.maslowcnc.com/t/can-the-maslow-4-be-used-for-flattening/19089/5 "2023-08-04T17:43:59Z")

</div>

I’m nog an expert or something… but i do think it might be possible with the Maslow Mark II design from TomD since the frame is designed in a gantry style set up. Im currently building this style of frame myself so in a few weeks i will be able to tell you haha.

Mike

> [@Maslow Mark II - 3D](https://forums.maslowcnc.com/t/maslow-mark-ii-3d/9098):
>
> Gentleman, I would like to share with you my latest experience with my new build: Maslow Mark II - 3D. My main objective was to improve accuracy, makes material handling easier and add 3D capabilities. I addressed most of the “best practices” as described over several forum threads. Rigid and level frame. Motors and ring on the same level as centre of gravity so chains are parallel to work surface. Concentric router bit and ring axis; removing ring flexibility. Simplification of Z-axis For…

---

_[View the full topic](https://forums.maslowcnc.com/t/can-the-maslow-4-be-used-for-flattening/19089)._