# Chain gets tangled

**URL:** <https://forums.maslowcnc.com/t/chain-gets-tangled/13911>\
**Category:** Troubleshooting\
**Created:** [July 6, 2020, 9:12pm UTC](https://forums.maslowcnc.com/t/chain-gets-tangled/13911 "2020-07-06T21:12:42Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [July 7, 2020, 1:33pm UTC](https://forums.maslowcnc.com/t/chain-gets-tangled/13911/6 "2020-07-07T13:33:17Z")

</div>

> [@nycedwardd](#):
>
> feeds from the bottom. Does changing that have any significant impact?

- having the slack chain over the top keeps them mostly away from the dust and if you cut smaller parts, allows to slide your sheet left/right to have the part centered on the frame

> [@nycedwardd](#):
>
> it’s tensioned on a bungee cord

- look up the weight tensioning. Far more consistent than the bungee cords and with milk bottles filled with sand or water fine adjustable. How not to do it is here [Poor man weight chain tensioning](https://forums.maslowcnc.com/t/poor-man-weight-chain-tensioning/5430) , there are far better solutions in the Forum.

Kind regards, Gero

---

_[View the full topic](https://forums.maslowcnc.com/t/chain-gets-tangled/13911)._
