# Connection disconnecting mid-anything

**URL:** <https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984>\
**Category:** Troubleshooting\
**Tags:** calibration\
**Created:** [May 2, 2025, 2:42pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984 "2025-05-02T14:42:25Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![AidenP](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aidenp/32/28022_2.png) [@AidenP](https://forums.maslowcnc.com/u/AidenP)\
**Post date:** [May 2, 2025, 2:42pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984/1 "2025-05-02T14:42:25Z")

</div>

I have been having issues with the Maslow where when I connect it directly from its wifi it would disconnect not even 5 minutes later. I thought that running it through say my phone’s hotspot would help with the connection issues, but same thing. I will get mostly through calibration then it will disconnect and then get stuck on fitness for 42 minutes… The only issue that I find is that I had it working before.

In attempt to cut some foam, the calibration was messed with to accommodate it being 2 inches thick. I was wondering if there would be a better way to either connect the Maslow to re-calibrate. As well as to prevent communication loss during jobs. (Why I can’t just retract and extend cables)

Edit: Apologies if this is already written about.  
Edit 2: This also results in me being unable to update wirelessly

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [May 2, 2025, 4:33pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984/2 "2025-05-02T16:33:07Z")

</div>

Hmmm wifi stuff is hard to debug because there are so many different factors and settings that change how each different device handles wifi connections.

> [@AidenP](#):
>
> The only issue that I find is that I had it working before.

Is there anything that stands out which changed from before?

---

<div class="post-metadata">

**Author:** ![AidenP](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aidenp/32/28022_2.png) [@AidenP](https://forums.maslowcnc.com/u/AidenP)\
**Post date:** [May 2, 2025, 4:58pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984/3 "2025-05-02T16:58:54Z")

</div>

not really. The only thing I thought that had changed was that i went to direct wifi instead of using my hotspot as an inbetween, however that did not work

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [May 2, 2025, 5:01pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984/4 "2025-05-02T17:01:09Z")

</div>

Direct wifi can be a little tricky because some devices don’t like to stay connected to wifi which doesn’t actually connect to the internet. There might be a setting in your computers wifi settings which would tell it to stay connected even if there is no internet available

---

<div class="post-metadata">

**Author:** ![AidenP](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aidenp/32/28022_2.png) [@AidenP](https://forums.maslowcnc.com/u/AidenP)\
**Post date:** [May 2, 2025, 5:05pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984/5 "2025-05-02T17:05:29Z")

</div>

perhaps. though that wouldn’t explain why the maslow would disconnect while connected to the hotspot

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [May 2, 2025, 6:00pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984/6 "2025-05-02T18:00:23Z")

</div>

I’ve also had trouble getting mine to play nice with my phone hotspot, I don’t have a good reason why and I gave up relatively quickly but I had the same issue

---

<div class="post-metadata">

**Author:** ![AidenP](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/aidenp/32/28022_2.png) [@AidenP](https://forums.maslowcnc.com/u/AidenP)\
**Post date:** [May 2, 2025, 8:34pm UTC](https://forums.maslowcnc.com/t/connection-disconnecting-mid-anything/23984/7 "2025-05-02T20:34:46Z")

</div>

I wish i had wifi, but since i am on a university campus, and their wifi service is weird, i cannot directly connect to their wifi. and my only choices are my phone hotspot or direct. but i like your idea of checking wifi settings on my computer. I will try that
