# Considering Preordering an M2

**URL:** <https://forums.maslowcnc.com/t/considering-preordering-an-m2/13600>\
**Category:** Uncategorized\
**Created:** [June 3, 2020, 4:45am UTC](https://forums.maslowcnc.com/t/considering-preordering-an-m2/13600 "2020-06-03T04:45:47Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [June 3, 2020, 12:50pm UTC](https://forums.maslowcnc.com/t/considering-preordering-an-m2/13600/2 "2020-06-03T12:50:42Z")

</div>

> [@Christian\_Rudman](#):
>
> (besides slow running, I am excited about the 40% speed bump of the m2)

There’s been a few posts around here regarding the M2 that discusses some of its differences with the Maslow. Here’s a link to some recent discussion, noting that I haven’t seen any real information from them on what I discuss there, so I’m definitely NOT saying there’s an issue with the M2.

> [@Maslow PCBs](https://forums.maslowcnc.com/t/maslow-pcbs/2864/8):
>
> Though this was addressed to @bar, I’ll chime in. If the firmware is based upon @ldocull’s GRBL port (which I believe is the case) and there’s been no update to it (which I also believe is the case), it’s a pretty simplistic kinematics model. I’ve not seen any comparison between the current kinematics model and the one in the GRBL port to really know which way is beter… you have to test them to truly know. My experience tells me that the current model is more accurate than the GRBL model, but…

With that said, I think the 40% speed increase is mostly attributable to a faster z-axis than the stock system and that’s been available for some time from many sources, its not new to the M2. What’s new is to M2 is the use of GRBL as the motor controller firmware and that does provide a speed increase, but not nearly as much as having a faster z-axis does.

---

_[View the full topic](https://forums.maslowcnc.com/t/considering-preordering-an-m2/13600)._
