# Couchside Table

**URL:** <https://forums.maslowcnc.com/t/couchside-table/25371>\
**Category:** My First Cuts\
**Created:** [December 29, 2025, 5:14pm UTC](https://forums.maslowcnc.com/t/couchside-table/25371 "2025-12-29T17:14:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zach](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/zach/32/29813_2.png) [@Zach](https://forums.maslowcnc.com/u/Zach)\
**Post date:** [December 29, 2025, 5:14pm UTC](https://forums.maslowcnc.com/t/couchside-table/25371/1 "2025-12-29T17:14:03Z")

</div>

Cut a small couch table out of 1/2” ply scrap I had lying around. Ran into some user errors around adding tabs and proper dogbone cuts to the design but managed to get it assembled. Used Krabzcam to generate GCode from an SVG.

Really cool to start to get a sense for the potential this machine has, looking forward to trying some cuts in better wood!

 ![PXL_20251227_193827883](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/a/9/a9bd179bf9f5bdcb98cf46c5e5b2c0fc79626e66.jpeg)

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [December 29, 2025, 5:22pm UTC](https://forums.maslowcnc.com/t/couchside-table/25371/2 "2025-12-29T17:22:02Z")

</div>

I love that design! Cool!

---

<div class="post-metadata">

**Author:** ![wouldchuck](https://avatars.discourse-cdn.com/v4/letter/w/58956e/32.png) [@wouldchuck](https://forums.maslowcnc.com/u/wouldchuck)\
**Post date:** [December 30, 2025, 5:30am UTC](https://forums.maslowcnc.com/t/couchside-table/25371/3 "2025-12-30T05:30:20Z")

</div>

Fun table. cool that you got it working!