# Counter weight system

**URL:** <https://forums.maslowcnc.com/t/counter-weight-system/2657>\
**Category:** Hardware\
**Created:** [March 9, 2018, 8:23pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657 "2018-03-09T20:23:06Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![knorrisster](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/knorrisster/32/23311_2.png) [@knorrisster](https://forums.maslowcnc.com/u/knorrisster)\
**Post date:** [March 12, 2018, 4:02pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/21 "2018-03-12T16:02:17Z")

</div>

Great that you used recycled metal for Your Maslow looks very solid. The rust is patina. I like your counter weight system and 3D printing the sprockets is cool. Did you make your sled linkage system? I plan on replacing the triangular linkage on my sled with the circular system that Bar has designed when it is available in the store.

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [March 12, 2018, 9:05pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/22 "2018-03-12T21:05:03Z")

</div>

Please let us know how they compare. We have theories that say the linkage  
should work better than the ring, but nobody has done a head-to-head comparison.

David Lang

---

<div class="post-metadata">

**Author:** ![knorrisster](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/knorrisster/32/23311_2.png) [@knorrisster](https://forums.maslowcnc.com/u/knorrisster)\
**Post date:** [March 12, 2018, 10:17pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/23 "2018-03-12T22:17:15Z")

</div>

Will do when I have the circular.

---

<div class="post-metadata">

**Author:** ![Gordo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gordo/32/152_2.png) [@Gordo](https://forums.maslowcnc.com/u/Gordo)\
**Post date:** [March 13, 2018, 11:43am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/24 "2018-03-13T11:43:38Z")

</div>

That’s a linkage kit David Lang sells. I plan on buying the ring kit as soon as I can get it. The pantograph works in 90% of the work space but it binds in the lower left and right corners

---

<div class="post-metadata">

**Author:** ![knorrisster](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/knorrisster/32/23311_2.png) [@knorrisster](https://forums.maslowcnc.com/u/knorrisster)\
**Post date:** [March 13, 2018, 2:13pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/25 "2018-03-13T14:13:00Z")

</div>

Very interesting, I see some of the binding in the upper parts of the work space. I have looked closely at all of the joints and can’t determine where they are sticking. My kit is the wood version.

---

<div class="post-metadata">

**Author:** ![eppic](https://avatars.discourse-cdn.com/v4/letter/e/e9bcb4/32.png) [@eppic](https://forums.maslowcnc.com/u/eppic)\
**Post date:** [March 14, 2018, 10:42pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/26 "2018-03-14T22:42:01Z")

</div>

I don’t know the ratios, but that makes sense. I am intending to experiment with a third motor controlling a downward and left to right pull on the sled instead of so much weight on the sled which if works out would equalize that weight across the top a lot more.

Thank you for the insight. Getting to refine my ideas before my kit gets here thanks to all the knowledgeable and helpful community here!

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [March 14, 2018, 11:01pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/27 "2018-03-14T23:01:50Z")

</div>

the problem with a single motor pulling down is that the chains only work if the  
angles don’t get too extreme, and a third motor down a couple feet below the  
bottom of the work area would still mean you couldn’t cut most of the area of  
the workpiece.

a practical machine would need to new lower motors, and they would have to put  
just the right tension on the chain to pull the other chains tight (and note  
that you are never going to be pulling directly against the other chain, you  
will always be pulling at an angle), this makes the math pretty messy, so you  
will need to either slow down the machine or get a faster processor.

I’m not saying that it can’t be done, but I am saying that the cost is a lot  
more than it appears at first glance. We don’t know the benefits for sure (and  
won’t until someone builds one and we find the new sources of inaccuracy that it  
inttroduces).

I would go with a coreXY gantry before trying a 4-motor maslow. It would  
probably be cheaper as well as more accurate.

---

<div class="post-metadata">

**Author:** ![ChuckC](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/chuckc/32/5964_2.png) [@ChuckC](https://forums.maslowcnc.com/u/ChuckC)\
**Post date:** [March 15, 2018, 12:44pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/28 "2018-03-15T12:44:53Z")

</div>

![MaslowCNC2](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/a/aea36c411b97a219a8aa8fcfa0af2bff2d4bc780.JPG)  
We kept having chain twisting, causing irregular cuts and the sled to lift off the bed. After we brought out the bottom connection point, replaced the tension string with rope, added pulley tothe top, added counter weight with pulley, just about ALL of our issues went away! 😃

Now seeing the posts above we may slightly change to something a little more simple such as weight against wood as ours is in a community workshop [http://www.themakerstation.com](http://www.themakerstation.com) in Marietta Georgia and the easier we can make it for everyone, the better. Thanks again for sharing guys 🙂

---

<div class="post-metadata">

**Author:** ![ChuckC](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/chuckc/32/5964_2.png) [@ChuckC](https://forums.maslowcnc.com/u/ChuckC)\
**Post date:** [March 15, 2018, 12:52pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/29 "2018-03-15T12:52:09Z")

</div>

Here is a closer picture

 ![MalsowCNC3](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/e/e662723c0b88a793a13fb770a521b7fd8ae108b2.jpg)

---

<div class="post-metadata">

**Author:** ![Sharpsburg\_Woodworke](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/sharpsburg_woodworke/32/3794_2.png) [@Sharpsburg\_Woodworke](https://forums.maslowcnc.com/u/Sharpsburg_Woodworke)\
**Post date:** [March 15, 2018, 10:33pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/30 "2018-03-15T22:33:17Z")

</div>

Lol. He uses the same cad program as me. Check out the similarities here. [Is milling possible?](https://forums.maslowcnc.com/t/is-milling-possible/2654/6?u=sharpsburg_woodworke)

---

<div class="post-metadata">

**Author:** ![arnoldcp](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@arnoldcp](https://forums.maslowcnc.com/u/arnoldcp)\
**Post date:** [March 16, 2018, 2:14am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/31 "2018-03-16T02:14:20Z")

</div>

So if I understand correctly, and I probably don’t, an approach similar to the core XY approach could actually be implemented on the current Maslow using the triangular kinematics by using longer chains, a couple more sprockets and a second linkage kit for the bottom? You could even toss a spring in to keep tension on the chain.

(I am thinking about this more, this seems implausible. I need to look at the actual math so I don’t ask such dumb questions.)

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [March 16, 2018, 2:30am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/32 "2018-03-16T02:30:56Z")

</div>

I don’t know how you would get that to work, the bottom chains would be changing  
their lengths at a different rate than the top chains.

draw up what you are thinking of, and measure the length of the different chains  
with the sled at different points on the work area.

David Lang

---

<div class="post-metadata">

**Author:** ![blurfl](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blurfl/32/9_2.png) [@blurfl](https://forums.maslowcnc.com/u/blurfl)\
**Post date:** [March 16, 2018, 4:35am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/33 "2018-03-16T04:35:38Z")

</div>

> [@dlang](#):
>
> measure the length of the different chains with the sled at different points on the work area.

If using two tensioners (chains?) fed from the direction of the lower corners, the lower tensioner lengths can be calculated from the XY position of the sled and the machine dimensions in the same manner as the upper chains. Doing the calculations and motor control with a separate controller would take care of any concern about processing power.  
If the tension were applied from a single connection to the sled, the angle of the connection could still be calculated from the sled position, chosen to pull at an angle chosen to bisect the angle between the upper chains as near as possible within the horizontal travel limits of the moving end of the tensioner carriage. Still a two-motor setup, but a simpler connection to the sled.

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [March 16, 2018, 4:58am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/34 "2018-03-16T04:58:41Z")

</div>

your lower chain(s) are going to have to be driven at different speeds than the  
upper chains, so you are talking about adding one or two new motors. how can  
this still be a 2 motor machine?

and if you are trying for only one additional motor, look at where it would have  
to sit and the chain angle that it would have with the motor at different places  
on the machine. Where it’s forces are needed the most (in the bottom corners), a  
single additional chanin would be pulling in the wrong direction, making the  
problem worse.

---

<div class="post-metadata">

**Author:** ![blurfl](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blurfl/32/9_2.png) [@blurfl](https://forums.maslowcnc.com/u/blurfl)\
**Post date:** [March 16, 2018, 5:08am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/35 "2018-03-16T05:08:03Z")

</div>

Both approaches would add two more motors. They only need to keep pace with the sled, and spring element in their connection would handle the inevitable lag of following the sled’s reported position. Those position reports come frequently enough that the secondary controller/motor group should be able to maintain tension well enough. The Maslow is not a high-speed machine.

---

<div class="post-metadata">

**Author:** ![Donnivan](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@Donnivan](https://forums.maslowcnc.com/u/Donnivan)\
**Post date:** [November 30, 2019, 4:32am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/36 "2019-11-30T04:32:53Z")

</div>

Instead of using a third or fourth motor, what if a counterweight system was used to pull down on the sled? I haven’t set up yet, but this has been my thought for when I do get it going

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [November 30, 2019, 6:53am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/37 "2019-11-30T06:53:11Z")

</div>

where would you attach the motor and what direction would it be pulling in the  
bottom left corner? what dorection would it be pulling in the bottom right  
corner?

people frequently suggest doing somthing like this, but so far, only the 3rd  
motor approach of pushing from the top center seems to provide forces in the  
right direction in the right places (and I think it may be possible to use a  
weight instead of a motor using that design)

David Lang

---

<div class="post-metadata">

**Author:** ![Donnivan](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@Donnivan](https://forums.maslowcnc.com/u/Donnivan)\
**Post date:** [January 6, 2020, 5:32am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/38 "2020-01-06T05:32:26Z")

</div>

My thought is to put 2 counterweights on pulleys, one coming from each bottom corner (with pulleys roughly as far apart and down from the work surface as the motors are above it) so that the sled is being pulled from 4 directions. Up by motors and down by weighted cables through pulleys.

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [January 6, 2020, 6:21am UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/39 "2020-01-06T06:21:54Z")

</div>

how do you arrange the weights and the pulley’s on the bottom so that they pull  
towards the closest corner, not away from it?

David Lang

---

<div class="post-metadata">

**Author:** ![Donnivan](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@Donnivan](https://forums.maslowcnc.com/u/Donnivan)\
**Post date:** [January 7, 2020, 4:05pm UTC](https://forums.maslowcnc.com/t/counter-weight-system/2657/41 "2020-01-07T16:05:07Z")

</div>

![maspulley (1)](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/c/cba76610c7d5171db8341806fbc586a84c92c58a.png)

Orange = weights  
Green = pulleys  
Sorry for the childish illustration, it was best I could do quickly on my phone

[Previous page](https://forums.maslowcnc.com/t/counter-weight-system/2657.md?page=1)

[Next page](https://forums.maslowcnc.com/t/counter-weight-system/2657.md?page=3)
