# Cutting speed doesn't seem right

**URL:** <https://forums.maslowcnc.com/t/cutting-speed-doesnt-seem-right/3557>\
**Category:** Troubleshooting\
**Created:** [April 23, 2018, 5:24pm UTC](https://forums.maslowcnc.com/t/cutting-speed-doesnt-seem-right/3557 "2018-04-23T17:24:38Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![Tyler\_W\_Cox](https://avatars.discourse-cdn.com/v4/letter/t/ebca7d/32.png) [@Tyler\_W\_Cox](https://forums.maslowcnc.com/u/Tyler_W_Cox)\
**Post date:** [April 27, 2018, 5:12am UTC](https://forums.maslowcnc.com/t/cutting-speed-doesnt-seem-right/3557/10 "2018-04-27T05:12:43Z")

</div>

Thanks for all your help. I simplified the paths in the SVG, tweaked the image a little, and minified the file reducing the decimal precision.  
 ![alice2](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/9/94086421a69095be8bab93ed7f5483f83508e403.svg)

I then dropped the tolerance in Fusion 360 to 0.1 inches which produced much less dense g-code.  
[alice2.nc](https://forums.maslowcnc.com/uploads/maslowcnc/original/2X/8/8c0b9d1dc416d3cf6999b31cbc2e3858e0e818e0.nc) (725.6 KB)

The final result cut in about 3 hours.

 ![IMG_20180426_001843](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/5/542e972d1f2c2c23acfed692449df9b20407ebc5.jpg)

---

_[View the full topic](https://forums.maslowcnc.com/t/cutting-speed-doesnt-seem-right/3557)._