# Designing for CNC(MaslowCNC)

**URL:** <https://forums.maslowcnc.com/t/designing-for-cnc-maslowcnc/21159>\
**Category:** Maslow Community\
**Created:** [May 22, 2024, 1:39pm UTC](https://forums.maslowcnc.com/t/designing-for-cnc-maslowcnc/21159 "2024-05-22T13:39:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BuildPrintFlex](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@BuildPrintFlex](https://forums.maslowcnc.com/u/BuildPrintFlex)\
**Post date:** [May 22, 2024, 1:39pm UTC](https://forums.maslowcnc.com/t/designing-for-cnc-maslowcnc/21159/1 "2024-05-22T13:39:16Z")

</div>

I am a total noob when it comes to CNC. I do have a both a 3d printer and resin printer so i am a bit familiar with designing/modifying things for both. What do i need to think about for CNC (MaslowCNC)? Is it just like i Ikeafying my designs? Also any free recommendations on CAM software? I have used Freecad to design stufdf and i see they have CAM stuff.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [May 22, 2024, 3:07pm UTC](https://forums.maslowcnc.com/t/designing-for-cnc-maslowcnc/21159/2 "2024-05-22T15:07:52Z")

</div>

Here’s a quick intro to how it works…it’s a bit outdated, but still largely accurate:

[![](https://img.youtube.com/vi/ocmYJlFGjXY/maxresdefault.jpg "How To Use www.MakerCAM.com to Cut Something Out by Maslow CNC") ](https://www.youtube.com/watch?v=ocmYJlFGjXY)

---

<div class="post-metadata">

**Author:** ![Strimmer](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/strimmer/32/13147_2.png) [@Strimmer](https://forums.maslowcnc.com/u/Strimmer)\
**Post date:** [May 22, 2024, 7:11pm UTC](https://forums.maslowcnc.com/t/designing-for-cnc-maslowcnc/21159/3 "2024-05-22T19:11:35Z")

</div>

I have a Maslow with the M2 upgrade. I use FreeCad 21 for my designs. The gcode output works very well. I also use the gcode for my CNC500.
