# Discobot! (The hidden guide to the forums)

**URL:** <https://forums.maslowcnc.com/t/discobot-the-hidden-guide-to-the-forums/37>\
**Category:** Uncategorized\
**Created:** [July 17, 2017, 11:23pm UTC](https://forums.maslowcnc.com/t/discobot-the-hidden-guide-to-the-forums/37 "2017-07-17T23:23:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [July 17, 2017, 11:23pm UTC](https://forums.maslowcnc.com/t/discobot-the-hidden-guide-to-the-forums/37/1 "2017-07-17T23:23:10Z")

</div>

When you sign up a robot called “discobot” will send you a message which is a walk through of how to use all of the forum features. I would have missed it had I not read about it during the setup process. The discobot walk-through took about 5 minutes and I learned some things, so I’d recommend checking it out!

 ![](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/1X/a412be7640c5e2d4f0efe323eb1f20e9af7e3d19.JPG)