# Does anyone have a Maslow 4 in Sydney?

**URL:** <https://forums.maslowcnc.com/t/does-anyone-have-a-maslow-4-in-sydney/22138>\
**Category:** Maslow Community\
**Created:** [August 24, 2024, 6:45am UTC](https://forums.maslowcnc.com/t/does-anyone-have-a-maslow-4-in-sydney/22138 "2024-08-24T06:45:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![RedKoi42](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@RedKoi42](https://forums.maslowcnc.com/u/RedKoi42)\
**Post date:** [August 24, 2024, 6:45am UTC](https://forums.maslowcnc.com/t/does-anyone-have-a-maslow-4-in-sydney/22138/1 "2024-08-24T06:45:33Z")

</div>

I’m based in Sydney and, given it’s a bit hard to get hold of the Maslow 4 direct for now, I was wondering if anyone has a Maslow 4 and lives in the greater Sydney area and would be up for sharing their machine for a project - beers on me! If you have an earlier model Maslow, get in touch anyway!

Cheers, Tony

---

<div class="post-metadata">

**Author:** ![ian\_ab](https://avatars.discourse-cdn.com/v4/letter/i/a587f6/32.png) [@ian\_ab](https://forums.maslowcnc.com/u/ian_ab)\
**Post date:** [August 24, 2024, 8:19pm UTC](https://forums.maslowcnc.com/t/does-anyone-have-a-maslow-4-in-sydney/22138/2 "2024-08-24T20:19:23Z")

</div>

I am on the Central Coast, still new to CNC and have only been testing so far.

---

<div class="post-metadata">

**Author:** ![RedKoi42](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@RedKoi42](https://forums.maslowcnc.com/u/RedKoi42)\
**Post date:** [August 25, 2024, 4:43am UTC](https://forums.maslowcnc.com/t/does-anyone-have-a-maslow-4-in-sydney/22138/3 "2024-08-25T04:43:50Z")

</div>

Oh fantastic Ian, thats good to know. I have a summer project in mind so I’ll come back in a bit and see if you’d be up for doing some wok togther!

---

<div class="post-metadata">

**Author:** ![DanVinar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/danvinar/32/25149_2.png) [@DanVinar](https://forums.maslowcnc.com/u/DanVinar)\
**Post date:** [October 5, 2024, 12:09pm UTC](https://forums.maslowcnc.com/t/does-anyone-have-a-maslow-4-in-sydney/22138/4 "2024-10-05T12:09:37Z")

</div>

Hi,  
I’m Canberra based, and just gave birth to a Maslow 4 in my garage (it’s ALIVE!)