# Don’t buy a Router table, build one **URL:** \ **Category:** Uncategorized\ **Created:** [November 8, 2018, 9:28pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635 "2018-11-08T21:28:02Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![S.Keehn](https://avatars.discourse-cdn.com/v4/letter/s/9dc877/32.png) [@S.Keehn](https://forums.maslowcnc.com/u/S.Keehn)\ **Post date:** [November 8, 2018, 9:28pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/1 "2018-11-08T21:28:02Z")
![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/b22387992b03fbefdacfced252410dc60157778d.jpeg) ---
**Author:** ![Jayster](https://avatars.discourse-cdn.com/v4/letter/j/d78d45/32.png) [@Jayster](https://forums.maslowcnc.com/u/Jayster)\ **Post date:** [November 8, 2018, 10:29pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/2 "2018-11-08T22:29:12Z")
This has been talked about before but I think you’re the first to actually build it and show it. Now you just need a clampable fence. Thanks for sharing. ---
**Author:** ![S.Keehn](https://avatars.discourse-cdn.com/v4/letter/s/9dc877/32.png) [@S.Keehn](https://forums.maslowcnc.com/u/S.Keehn)\ **Post date:** [November 8, 2018, 10:44pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/3 "2018-11-08T22:44:08Z")
Got one. Used it with the Maslow to trim the frame below. ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/4/4c68da7ffb7cf57beaad6a4b4b14df67c7d32f4c.jpeg) ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [November 8, 2018, 10:55pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/4 "2018-11-08T22:55:39Z")
That’s a very nice set of legs for such a table, have you posted them somewhere? ---
**Author:** ![S.Keehn](https://avatars.discourse-cdn.com/v4/letter/s/9dc877/32.png) [@S.Keehn](https://forums.maslowcnc.com/u/S.Keehn)\ **Post date:** [November 8, 2018, 11:54pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/5 "2018-11-08T23:54:15Z")
Somewhere? Just here. ---
**Author:** ![Mccand](https://avatars.discourse-cdn.com/v4/letter/m/ce7236/32.png) [@Mccand](https://forums.maslowcnc.com/u/Mccand)\ **Post date:** [November 9, 2018, 11:02am UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/6 "2018-11-09T11:02:23Z")
Just sitting here looking at the table, asking myself why you would want a round router table? 🤔 Then I noticed its your maslow sled! ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [November 9, 2018, 7:21pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/7 "2018-11-09T19:21:04Z")
I would suggest drilling a hole through the sled and installing a t-nut on the top of it, that way when you use it as a router table you can thread a bolt into it to use to stabilize your work. David Lang ---
**Author:** ![ManOfScience](https://avatars.discourse-cdn.com/v4/letter/m/47e85d/32.png) [@ManOfScience](https://forums.maslowcnc.com/u/ManOfScience)\ **Post date:** [November 10, 2018, 4:23pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/8 "2018-11-10T16:23:07Z")
> [@S.Keehn](#): > > Somewhere? Just here. Great work! I’d love to try to cut a pair of these out … … but am not adept enough at using the Maslow Forums to find the files ☹ Anyone have a link? ---
**Author:** ![S.Keehn](https://avatars.discourse-cdn.com/v4/letter/s/9dc877/32.png) [@S.Keehn](https://forums.maslowcnc.com/u/S.Keehn)\ **Post date:** [November 11, 2018, 2:28am UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/9 "2018-11-11T02:28:15Z")
I’ll either post the files here or on the community garden, gotta give me a couple days though. ---
**Author:** ![S.Keehn](https://avatars.discourse-cdn.com/v4/letter/s/9dc877/32.png) [@S.Keehn](https://forums.maslowcnc.com/u/S.Keehn)\ **Post date:** [November 15, 2018, 12:22am UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/10 "2018-11-15T00:22:08Z")
![Router%20Table](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/2/2ebc0c5377196eadf0c9dabd06de795ef13da83c.svg) [Router Table.nc](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/1/1a368d30b64e747976895209c427c246e178504f.nc) (39.7 KB) Here is the .SVG and the .NC files that I used to cut the legs, to be honest I figured I would need some space where they come together and they ended up pretty loose, so I use a could cabinet leveling wedges to make them tight. I pull them apart and store them behind the Maslow when not in use. ---
**Author:** ![Bart\_Verheyde](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bart_verheyde/32/12996_2.png) [@Bart\_Verheyde](https://forums.maslowcnc.com/u/Bart_Verheyde)\ **Post date:** [November 15, 2018, 1:01pm UTC](https://forums.maslowcnc.com/t/don-t-buy-a-router-table-build-one/7635/11 "2018-11-15T13:01:47Z")
good idea! , I add it to my evergrowing list