# Dust Collector Shroud 3D Print Settings

**URL:** <https://forums.maslowcnc.com/t/dust-collector-shroud-3d-print-settings/20422>\
**Category:** Technical Details\
**Created:** [March 29, 2024, 6:11pm UTC](https://forums.maslowcnc.com/t/dust-collector-shroud-3d-print-settings/20422 "2024-03-29T18:11:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![silo0623](https://avatars.discourse-cdn.com/v4/letter/s/ea5d25/32.png) [@silo0623](https://forums.maslowcnc.com/u/silo0623)\
**Post date:** [March 29, 2024, 6:11pm UTC](https://forums.maslowcnc.com/t/dust-collector-shroud-3d-print-settings/20422/1 "2024-03-29T18:11:58Z")

</div>

Any suggestions for print orientation and support for printing the dust collector shroud? It’s a pretty large part so I’d like to try and nail it on the first try.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [March 29, 2024, 6:23pm UTC](https://forums.maslowcnc.com/t/dust-collector-shroud-3d-print-settings/20422/2 "2024-03-29T18:23:47Z")

</div>

I printed mine in the same orientation that it will be used with 100% infill (because it’s basically just a shell anyway) and the default prusa slicer supports in PLA

---

<div class="post-metadata">

**Author:** ![jwolter](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jwolter/32/30787_2.png) [@jwolter](https://forums.maslowcnc.com/u/jwolter)\
**Post date:** [March 30, 2024, 12:43pm UTC](https://forums.maslowcnc.com/t/dust-collector-shroud-3d-print-settings/20422/3 "2024-03-30T12:43:00Z")

</div>

> [@bar](#):
>
> same orientation that it will be used

On a vertical or horizontal build?

---

<div class="post-metadata">

**Author:** ![silo0623](https://avatars.discourse-cdn.com/v4/letter/s/ea5d25/32.png) [@silo0623](https://forums.maslowcnc.com/u/silo0623)\
**Post date:** [March 30, 2024, 6:54pm UTC](https://forums.maslowcnc.com/t/dust-collector-shroud-3d-print-settings/20422/4 "2024-03-30T18:54:01Z")

</div>

I oriented it so the screw holes were flat against the build plate. That’s how the model was imported and that’s how I interpreted Bar’s response.

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/2/0/20ec1641f86248d2515d184ce60d2db411d2be55.jpeg)