# Expansion to 4x10

**URL:** <https://forums.maslowcnc.com/t/expansion-to-4x10/24566>\
**Category:** Hardware\
**Created:** [July 18, 2025, 3:24pm UTC](https://forums.maslowcnc.com/t/expansion-to-4x10/24566 "2025-07-18T15:24:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![david\_Stevens](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/david_stevens/32/28758_2.png) [@david\_Stevens](https://forums.maslowcnc.com/u/david_Stevens)\
**Post date:** [July 18, 2025, 3:24pm UTC](https://forums.maslowcnc.com/t/expansion-to-4x10/24566/1 "2025-07-18T15:24:39Z")

</div>

Can the Maslow 4.1 be lengthed to cut an 8x10 piece of plywood?

Thanks in advance

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [July 19, 2025, 9:30pm UTC](https://forums.maslowcnc.com/t/expansion-to-4x10/24566/2 "2025-07-19T21:30:49Z")

</div>

david Stevens wrote:

> Can the Maslow 4.1 be lengthed to cut an 8x10 piece of plywood?

you should be able to, play arounds with the frame calculators

> **[Anchor Point Layout Simulator](https://maslowcnc.github.io/Layout-Simulator/)**

[http://www.lang.hm/maslow/maslow4\_frame.html](http://www.lang.hm/maslow/maslow4_frame.html)

the limiting factor would be the belt length, you may need to put extensions to  
make it work.

David Lang