# "Extend All" not working

**URL:** <https://forums.maslowcnc.com/t/extend-all-not-working/21332>\
**Category:** Troubleshooting\
**Tags:** calibration\
**Created:** [June 2, 2024, 5:59pm UTC](https://forums.maslowcnc.com/t/extend-all-not-working/21332 "2024-06-02T17:59:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Frank\_Currie](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/frank_currie/32/24040_2.png) [@Frank\_Currie](https://forums.maslowcnc.com/u/Frank_Currie)\
**Post date:** [June 2, 2024, 5:59pm UTC](https://forums.maslowcnc.com/t/extend-all-not-working/21332/1 "2024-06-02T17:59:05Z")

</div>

Hi,  
I haven’t used the Maslow for a couple of weeks and wanted to run a quick cut. I upgraded to 0.75 ([Release v0.75 · BarbourSmith/FluidNC · GitHub](https://github.com/BarbourSmith/FluidNC/releases/tag/v0.75); reporting 0.74). I’m consistently getting an issue where I can’t extend the belts. I’ve tried 4 times and now looking for some help. The serial log is attached but nothing really of use.

Video link to show the behaviour at [https://photos.app.goo.gl/qiaomFZvakMWH7KT8](https://photos.app.goo.gl/qiaomFZvakMWH7KT8).

Any guidance appreciated.

frank.

[Maslow-serial (1).log](https://forums.maslowcnc.com/uploads/short-url/c22n4yXRMMuFdvZY2oU6lv9WovM.log) (1.8 KB)

---

<div class="post-metadata">

**Author:** ![Frank\_Currie](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/frank_currie/32/24040_2.png) [@Frank\_Currie](https://forums.maslowcnc.com/u/Frank_Currie)\
**Post date:** [June 2, 2024, 10:35pm UTC](https://forums.maslowcnc.com/t/extend-all-not-working/21332/2 "2024-06-02T22:35:58Z")

</div>

Didn’t make any progress so reimagined back to 0.71 and three of the belts started to extend. The bottom left is still problematic.

Is there a log that I could look at to see is there is a sensor issue, etc.?

[EDIT - It look like my issue has a name “Push to Extend”. Will monitor the thread at [Push to extend bug? - #87 by Carson\_Barry](https://forums.maslowcnc.com/t/push-to-extend-bug/20857/87)