# Feed speed support

**URL:** <https://forums.maslowcnc.com/t/feed-speed-support/8025>\
**Category:** No Judgement\
**Created:** [December 6, 2018, 8:04pm UTC](https://forums.maslowcnc.com/t/feed-speed-support/8025 "2018-12-06T20:04:52Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![ame](https://avatars.discourse-cdn.com/v4/letter/a/3be4f8/32.png) [@ame](https://forums.maslowcnc.com/u/ame)\
**Post date:** [December 10, 2018, 7:24am UTC](https://forums.maslowcnc.com/t/feed-speed-support/8025/8 "2018-12-10T07:24:59Z")

</div>

Right. I was dealing with that in another thread:

> [@Step by Step guide to creating GCode for the Maslow with FreeCAD](https://forums.maslowcnc.com/t/step-by-step-guide-to-creating-gcode-for-the-maslow-with-freecad/5279/6):
>
> Or if anyone wants to help develop new features for it… [https://github.com/waltmoorhouse/maslow\_post](https://github.com/waltmoorhouse/maslow_post)

I was suspicious of the F parameter argument so I asked about it here and put the results back there. Unfortunately @Walt_Moorhouse does not seem to be around at the moment to comment on my modification to his script.

---

_[View the full topic](https://forums.maslowcnc.com/t/feed-speed-support/8025)._