# Fine tuning advice/adjustments **URL:** \ **Category:** Troubleshooting\ **Tags:** accuracy, communitygarden\ **Created:** [July 31, 2018, 1:58am UTC](https://forums.maslowcnc.com/t/fine-tuning-advice-adjustments/5316 "2018-07-31T01:58:20Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![IdtDesigner](https://avatars.discourse-cdn.com/v4/letter/i/87869e/32.png) [@IdtDesigner](https://forums.maslowcnc.com/u/IdtDesigner)\ **Post date:** [July 31, 2018, 1:58am UTC](https://forums.maslowcnc.com/t/fine-tuning-advice-adjustments/5316/1 "2018-07-31T01:58:20Z")
I have finally got my Maslow up and running. I even did a couple of small projects cutting some cursive letters. But now it’s time to get serious 😃 I want to dial in the accuracy so I cut a 3x3 square out of .75” plywood. This is in prep for my first “real project”. Settings Router 23x .25” 2 flute mill (slightly used) 15 ipm feed 30 ipm plunge .20 depth of cut The results were as follows if you were looking at the square. I should note the corners were all square surprisingly. Left to right 2.875” Top to bottom 2.75” So my questions is how can I/should I adjust the Maslow in ground control to walk the accuracy in and fix this .125” - .25” inaccuracy? Thanks! ---
**Author:** ![Dustcloud](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dustcloud/32/1786_2.png) [@Dustcloud](https://forums.maslowcnc.com/u/Dustcloud)\ **Post date:** [July 31, 2018, 2:26am UTC](https://forums.maslowcnc.com/t/fine-tuning-advice-adjustments/5316/2 "2018-07-31T02:26:40Z")
Hi IDT! Welcome to the forum! Check out the following thread… plenty of good info there! > [@Let’s dial it in!](https://forums.maslowcnc.com/t/let-s-dial-it-in/4681): > > Just got my maslow set up. My 18” sled circle is 18 by 17.75 I know this is not a huge deal but I’d like to dial it in. All help is appreciated. Keep us posted on how it’s cutting!