# First Design to Finish Simple Dog Sign

**URL:** <https://forums.maslowcnc.com/t/first-design-to-finish-simple-dog-sign/3354>\
**Category:** Projects\
**Created:** [April 14, 2018, 12:59pm UTC](https://forums.maslowcnc.com/t/first-design-to-finish-simple-dog-sign/3354 "2018-04-14T12:59:19Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ttitobob](https://avatars.discourse-cdn.com/v4/letter/t/848f3c/32.png) [@Ttitobob](https://forums.maslowcnc.com/u/Ttitobob)\
**Post date:** [April 14, 2018, 12:59pm UTC](https://forums.maslowcnc.com/t/first-design-to-finish-simple-dog-sign/3354/1 "2018-04-14T12:59:19Z")

</div>

This was my first “design” to finish. I used Easel to create the G-Code. This is a great tool for noobs like me to learn the cutting process. They have a preview that shows what it will look like before you cut. Overall- had a few issues 1) cutting on side of plywood sled jumped a bit due to cutting to close to edge. caused a small bump in corner. The lettering i put a little close to the edge. 2) Tabs didn’t make big enough and had to quickly stop router/Code.

This was also first cut with Z-Axis-WORTH EVERY PENNY!!!

Ginger wanted was sad it wasn’t a real treat.

Used  
.25 bit from site  
30i/m

 ![20180414_084228](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/3/3a01d5f2fad80739d7e33c3545c8592266fb52f4.jpg) ![20180414_084246](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/6/68826ff9981b3e7d707b6d1d03116dec2a872abe.jpg)

---

<div class="post-metadata">

**Author:** ![Stephen\_Slagle](https://avatars.discourse-cdn.com/v4/letter/s/df705f/32.png) [@Stephen\_Slagle](https://forums.maslowcnc.com/u/Stephen_Slagle)\
**Post date:** [April 14, 2018, 2:50pm UTC](https://forums.maslowcnc.com/t/first-design-to-finish-simple-dog-sign/3354/2 "2018-04-14T14:50:11Z")

</div>

The spot where it jumped, actually looks good. Gives it that pre chewed kinda look. If you hadn’t said anything, I would have thought you planned it.

---

<div class="post-metadata">

**Author:** ![hannah](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/hannah/32/3414_2.png) [@hannah](https://forums.maslowcnc.com/u/hannah)\
**Post date:** [April 25, 2018, 10:20pm UTC](https://forums.maslowcnc.com/t/first-design-to-finish-simple-dog-sign/3354/3 "2018-04-25T22:20:33Z")

</div>

I think Ginger is the most adorable dog I’ve ever seen. I could look at this picture for hours. Just wanted to let you know 🙂

---

<div class="post-metadata">

**Author:** ![Ttitobob](https://avatars.discourse-cdn.com/v4/letter/t/848f3c/32.png) [@Ttitobob](https://forums.maslowcnc.com/u/Ttitobob)\
**Post date:** [April 26, 2018, 11:34am UTC](https://forums.maslowcnc.com/t/first-design-to-finish-simple-dog-sign/3354/4 "2018-04-26T11:34:09Z")

</div>

Thanks Hannah, She is a Golden retriever and Irish setter mix and spoiled rotten.