# First time setting up. Broke the clamp wedge. Having trouble calibrating

**URL:** <https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350>\
**Category:** Troubleshooting\
**Tags:** accuracy, calibration\
**Created:** [December 23, 2025, 12:47am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350 "2025-12-23T00:47:52Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cody](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cody/32/30047_2.png) [@Cody](https://forums.maslowcnc.com/u/Cody)\
**Post date:** [December 23, 2025, 12:47am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/1 "2025-12-23T00:47:52Z")

</div>

Hi All!

Just got Maslow set up and during the build process broke one of the clamp wedges that goes in the bottom router clamp. I didn’t think much of it at the time, everything else seemed to be working ok. I was able to get up and running with the default calibration size and grid on the latest firmware, and make a few cuts that came out (what I thought at the time) great. However, they’re quite off intended specs.

So I made a few frame adjustments, and tried to recalibrate using 0x0 as the height/width, and I can’t for the life of me get it to calibrate again. I’ve tried defining the frame size in the yaml file settings, starting from scratch, fixing the belt lengths, etc, but whenever I try running calibration I just get stuck in a fitness too low loop.

I’m wondering what could be throwing it off, and while looking in the config settings, I noticed some of the z heights are off from what the UI says they should be. Could this be because of the broken clamp wedge? The belts dont seem to have too much height variance there.

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [December 23, 2025, 1:06am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/2 "2025-12-23T01:06:02Z")

</div>

Cody wrote:

> I¢m wondering what could be throwing it off, and while looking in the config  
> settings, I noticed some of the z heights are off from what the UI says they  
> should be. Could this be because of the broken clamp wedge? The belts dont  
> seem to have too much height variance there.

the clamp wedge won’t affect your Z height. The default Z heights assume that  
your anchors are at the height of the surface the sled is riding on when you  
calibrate. If this is not correct, or you have the arms in a different order,  
this will cause low fitness

also make sure the router is all the way down when you do the calibration.

David Lang

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [December 23, 2025, 1:34am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/3 "2025-12-23T01:34:39Z")

</div>

The low fitness probably means that there is something funky going on with the measurements that we’re feeding into the math.

Does it seem like all four belts are getting fully tight each time the machine is taking a measurement during the process?

---

<div class="post-metadata">

**Author:** ![Cody](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cody/32/30047_2.png) [@Cody](https://forums.maslowcnc.com/u/Cody)\
**Post date:** [December 23, 2025, 1:47am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/4 "2025-12-23T01:47:42Z")

</div>

I reset the maslow.yaml file to the original and tried again, this time using a 800x800 5x5 grid, and still stuck in a fitness loop. The belts are all tight, arms all in the correct order.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [December 23, 2025, 2:56am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/5 "2025-12-23T02:56:47Z")

</div>

Can you post a copy of your log file? You can download it using this blue button here:

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/0/f/0fab5ca64894d57f6287698709c2cfcd424bb06e.png)

---

<div class="post-metadata">

**Author:** ![Cody](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/cody/32/30047_2.png) [@Cody](https://forums.maslowcnc.com/u/Cody)\
**Post date:** [December 23, 2025, 4:27am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/6 "2025-12-23T04:27:03Z")

</div>

Thanks! I was about to do that but new users can’t upload files. Here was the log as it was failing: [Maslow Calibration Failure · GitHub](https://gist.github.com/realcodylarocque/ebe82094272a3913cffbb51928807b35)

It seems some combination of doing a few retract/extends, really squaring the frame up, and blowing out the belts and motors got it to calibrate, but fitness was at 1.6 something, which seems too good to be true.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [December 23, 2025, 4:37am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/7 "2025-12-23T04:37:02Z")

</div>

That sounds great to me!

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [December 23, 2025, 5:23am UTC](https://forums.maslowcnc.com/t/first-time-setting-up-broke-the-clamp-wedge-having-trouble-calibrating/25350/8 "2025-12-23T05:23:05Z")

</div>

Cody wrote:

> It seems some combination of doing a few retract/extends, really squaring the  
> frame up, and blowing out the belts and motors got it to calibrate, but  
> fitness was at 1.6 something, which seems too good to be true.

when you calibrate over a small area, you get higher fitness scores than over a  
larger area. This is due to the fact that your data isn’t as good. It’s trying  
to figure out triangles to figure out the anchor locations, and the smaller the  
narrow end of the triangle, the less accurate the far corner will be.

David Lang
