# Found and Shared **URL:** \ **Category:** Found and Shared\ **Created:** [June 1, 2018, 1:01pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190 "2018-06-01T13:01:36Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:01pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/1 "2018-06-01T13:01:36Z")
A rocking Elephant for small kids (pdf & dwg) Respect to Jmesman, thanks for sharing. Licence: [[https://creativecommons.org/licenses/by-nc-sa/2.5/](https://creativecommons.org/licenses/by-nc-sa/2.5/)] ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/8/8a8eec9edd8738670bcb52d6972230237248a3ad.jpg) [http://www.instructables.com/id/Rocking-Elephant/](http://www.instructables.com/id/Rocking-Elephant/) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:03pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/2 "2018-06-01T13:03:57Z")
Huge variation of what can be done with creativity and CNC Respect to Tom Kluyskens, thanks for sharing Licence: All Rights Reserved (Parental advise on this one! Please do not create gaps were little hands can get trapped) A great source of inspiration though ![](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/c/c5e32c9589b05381238f01aa93aa4ddca93a1ca9.jpg "designs - selection") [flicker album](https://www.flickr.com/photos/tomkluyskens/albums/72157624908265940) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:05pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/3 "2018-06-01T13:05:30Z")
How to make (almost) anything (bending plywood sheets) and a rocking chair Respect to Kristin Zimmerman, thanks for sharing Licence: unknown (please research) ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/4/42959892fc38fa3e236539fbec7a2e832f15e355.jpg) [http://fab.cba.mit.edu/classes/863.13/people/Kristin/Weeks/Week5/index.html](http://fab.cba.mit.edu/classes/863.13/people/Kristin/Weeks/Week5/index.html) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:17pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/4 "2018-06-01T13:17:48Z")
Linux, pdf2svg (is in my ubuntu mate packages, not tried yet!) I think itโ€™s worth an investigation. Respect to โ€ฆ hmm? Licence: Something with a gnu I guess [https://packages.ubuntu.com/search?keywords=pdf2svg](https://packages.ubuntu.com/search?keywords=pdf2svg) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:22pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/5 "2018-06-01T13:22:18Z")
Scorch Works has some amazing tools like the [Gcoderipper](http://www.scorchworks.com/Gcoderipper/gcoderipper.html) and [F-Engrave](http://www.scorchworks.com/Fengrave/fengrave.html) [http://www.scorchworks.com/](http://www.scorchworks.com/) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:28pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/6 "2018-06-01T13:28:43Z")
A huge resource of calculators for all kind of stuff. [http://www.daycounter.com/Calculators/](http://www.daycounter.com/Calculators/) I used the [G-Code tool path for drilling multiple holes](http://www.daycounter.com/Calculators/GCode/GCode-Holes.phtml) with great success. (pecking) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:33pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/7 "2018-06-01T13:33:32Z")
A collection of Python scripts that generate simple G-Code A bezel like you would see on the front panel of a stereo around the volume control knobs is only one of them. ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/c/cdeda1124365929a3c72cc76ac4b639829b5ba3c.png) [simple-gcode-generators](https://github.com/LinuxCNC/simple-gcode-generators) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 1:41pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/8 "2018-06-01T13:41:28Z")
Amazing find by @xrok1 and shamelessly copied here ๐Ÿ™‚ ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/a/a00b5becc7fb70e494ec2d06ddc260155f875c75.jpg) Bending plywood example and calculator. [Bent-Plywood-Chair](http://www.instructables.com/id/Bent-Plywood-Chair) Link for kerf calculating: [Kerf Spacing Calculator for Bending Wood - Inch](https://www.blocklayer.com/kerf-spacingeng.aspx) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 2:11pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/9 "2018-06-01T14:11:19Z")
CNC Workstation (pdf and svg) Respect to [Windell Oskay](https://www.evilmadscientist.com/author/windell_oskay/), thanks for sharing. ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/7/7e67f7fc1d3579a2add3a39a5eaaa216b4556014.jpg) [https://www.evilmadscientist.com/2012/cnc-workstation/](https://www.evilmadscientist.com/2012/cnc-workstation/) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 2:59pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/10 "2018-06-01T14:59:28Z")
An interesting app using [Processing](https://processing.org/) to adjust a Maker Bench in length, width, height and material thickness, before exporting to a dxf. Respect to [Anna Kaziunas France](https://makezine.com/author/annafrance), thanks for sharing. ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/6/6bf86abb5161050666a4ca9f76f9ab678a0300f1.jpg) Instructions: [cnc-maker-bench](https://makezine.com/projects/make-38-cameras-and-av/cnc-maker-bench/) The files to run in Processing: [https://github.com/akaziuna/cnc-standing-height-workbench/tree/master/AtFAB\_OneToSeveral\_App.v2](https://github.com/akaziuna/cnc-standing-height-workbench/tree/master/AtFAB_OneToSeveral_App.v2) How the app looks: ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/5/518ff0c50432c3628fa5f9bb942e9e52547b6eb0.png) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 1, 2018, 5:18pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/11 "2018-06-01T17:18:37Z")
[Mattermachine](http://mattermachine.com/) looks cool, but Iโ€™m not sure it is finished ๐Ÿค” It takes a certain browser to run, I got the online app working on Mac with Safari after installing Unity Web Player. No idea how to use it, itโ€™s cool never the less. ![50](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/c/c47822debd8bae67bdc7c609533d4feb2b54b68e.jpg) The online app is here: [http://mattermachine.com/app](http://mattermachine.com/app) Edit: Another picture from the presentation mode. ![21](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/b52a23f34c1020509f291faa96c6651dedb3be89.jpg) ---
**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Post date:** [June 14, 2018, 6:05pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/14 "2018-06-14T18:05:33Z")
Fun with numbers. A page with measurements as a guide for seating designs: ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/bd6a583eada872174504980f988a6b11257a382c.jpg) [Reference-Common-Dimensions-Angles-and-Heights-for-Seating-Designers](http://www.core77.com/posts/43422/Reference-Common-Dimensions-Angles-and-Heights-for-Seating-Designers) ---
**Author:** ![Jamtek](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jamtek/32/12604_2.png) [@Jamtek](https://forums.maslowcnc.com/u/Jamtek)\ **Post date:** [June 14, 2018, 8:23pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/15 "2018-06-14T20:23:18Z")
@Gero, Great information, but they forgot the drink holder. ๐Ÿ™‚ ---
**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\ **Post date:** [July 5, 2018, 6:54pm UTC](https://forums.maslowcnc.com/t/found-and-shared/4190/16 "2018-07-05T18:54:36Z")
I just stumbled across this and it looks pretty darn cool!