# Free space between belts and spindle

**URL:** <https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476>\
**Category:** No Judgement\
**Created:** [October 9, 2024, 10:53am UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476 "2024-10-09T10:53:43Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Moshe\_Kohen](https://avatars.discourse-cdn.com/v4/letter/m/a8b319/32.png) [@Moshe\_Kohen](https://forums.maslowcnc.com/u/Moshe_Kohen)\
**Post date:** [October 9, 2024, 10:53am UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476/1 "2024-10-09T10:53:43Z")

</div>

Before trying a cut, I noticed there is a large space and free movement between the belts and the router/spindle. Is that normal?  
Video shows an example, but that’s the case for all belts.

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [October 9, 2024, 5:28pm UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476/2 "2024-10-09T17:28:17Z")

</div>

That seems like more play than I would expect there. Which router are you using?

---

<div class="post-metadata">

**Author:** ![Moshe\_Kohen](https://avatars.discourse-cdn.com/v4/letter/m/a8b319/32.png) [@Moshe\_Kohen](https://forums.maslowcnc.com/u/Moshe_Kohen)\
**Post date:** [October 10, 2024, 10:44am UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476/3 "2024-10-10T10:44:41Z")

</div>

I am using a spindle with @md8n’s design.

This is the spindle:[https://www.aliexpress.com/item/1005006318067241.html?spm=a2g0o.order\_list.order\_list\_main.10.266318027MB6MH](https://www.aliexpress.com/item/1005006318067241.html?spm=a2g0o.order_list.order_list_main.10.266318027MB6MH)

This is the relevant post with the design: [M4 Router Be Gone (installed the spindle)](https://forums.maslowcnc.com/t/m4-router-be-gone-installed-the-spindle/21389)

---

<div class="post-metadata">

**Author:** ![md8n](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/md8n/32/28197_2.png) [@md8n](https://forums.maslowcnc.com/u/md8n)\
**Post date:** [October 10, 2024, 10:48am UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476/4 "2024-10-10T10:48:10Z")

</div>

You may need to print a slightly thicker outer sleeve to take up that slack space.

I did run into the issue, but I think I may have forgotten to mention it in my thread.

You’ll know it’s the correct diameter if you can only just get everything in there with the clamp wedges completely undone.

---

<div class="post-metadata">

**Author:** ![Moshe\_Kohen](https://avatars.discourse-cdn.com/v4/letter/m/a8b319/32.png) [@Moshe\_Kohen](https://forums.maslowcnc.com/u/Moshe_Kohen)\
**Post date:** [October 11, 2024, 5:44am UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476/5 "2024-10-11T05:44:13Z")

</div>

Thanks.  
It seems like the upper and lower parts are tight, but the four middle parts (belt holders) are with larger diameter.  
Did you work on an assembly model by any chance? Anywhere I can find a cad model of the belts assembly?

---

<div class="post-metadata">

**Author:** ![Moshe\_Kohen](https://avatars.discourse-cdn.com/v4/letter/m/a8b319/32.png) [@Moshe\_Kohen](https://forums.maslowcnc.com/u/Moshe_Kohen)\
**Post date:** [October 11, 2024, 5:45am UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476/6 "2024-10-11T05:45:14Z")

</div>

Alternatively, will you share the final files you printed?  
It would be very helpful since I am using the same exact spindle

---

<div class="post-metadata">

**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\
**Post date:** [October 11, 2024, 6:48am UTC](https://forums.maslowcnc.com/t/free-space-between-belts-and-spindle/22476/7 "2024-10-11T06:48:21Z")

</div>

Moshe wrote:

> It seems like the upper and lower parts are tight, but the four middle parts (belt holders) are with larger diameter.  
> Did you work on an assembly model by any chance? Anywhere I can find a cad model of the belts assembly?

> **[Source — Maslow](https://www.maslowcnc.com/source)**

David Lang
