# Fusion 360 Operations Not Aligned

**URL:** <https://forums.maslowcnc.com/t/fusion-360-operations-not-aligned/18048>\
**Category:** Fusion 360\
**Tags:** accuracy\
**Created:** [May 30, 2022, 7:34pm UTC](https://forums.maslowcnc.com/t/fusion-360-operations-not-aligned/18048 "2022-05-30T19:34:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![KDB](https://avatars.discourse-cdn.com/v4/letter/k/7feea3/32.png) [@KDB](https://forums.maslowcnc.com/u/KDB)\
**Post date:** [May 30, 2022, 7:34pm UTC](https://forums.maslowcnc.com/t/fusion-360-operations-not-aligned/18048/1 "2022-05-30T19:34:36Z")

</div>

I hope someone can offer up some ideas as I am out of them.  
I am using Fusion 360 for CAD/CAM and Ground Control 2022 with an East Bay controller.

The issue that I am experiencing is that my pockets do not line up with my 2D profile cuts.

In Fusion my sketch “looks” correct.  
In Fusion CAM the tool path and simulation “looks” correct.  
In Ground Control 2022 the tool path “looks” correct.

I am cutting pockets out of text and then cutting a 2D profile for the outline.  
In the final cut the two operations do not line up they way the look on screen.

Look at the word “ROAD” and you can see it is not centered between the outline profile cut. It should be.

I feel like I am missing something obvious and am not seeing it. Any suggestions would be greatly appreciated.

 ![IMG_4248.HEIC](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/7/e/7ed7f522d59fcc28fe45ad47a4920dd172a3146f.jpeg)

---

<div class="post-metadata">

**Author:** ![KDB](https://avatars.discourse-cdn.com/v4/letter/k/7feea3/32.png) [@KDB](https://forums.maslowcnc.com/u/KDB)\
**Post date:** [June 1, 2022, 2:13am UTC](https://forums.maslowcnc.com/t/fusion-360-operations-not-aligned/18048/2 "2022-06-01T02:13:32Z")

</div>

It turns out it was the controller. Swapped it out for a Due Maker Made and all is well.