# G-Code Optimizers?

**URL:** <https://forums.maslowcnc.com/t/g-code-optimizers/3246>\
**Category:** Software\
**Created:** [April 10, 2018, 11:28am UTC](https://forums.maslowcnc.com/t/g-code-optimizers/3246 "2018-04-10T11:28:59Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [April 10, 2018, 2:06pm UTC](https://forums.maslowcnc.com/t/g-code-optimizers/3246/5 "2018-04-10T14:06:53Z")

</div>

Manualy it can be done with

> [@A quick introduction video to generating gcode directly in OnShape using Kiri:Moto](https://forums.maslowcnc.com/t/a-quick-introduction-video-to-generating-gcode-directly-in-onshape-using-kiri-moto/3201/5):
>
> In bCNC I use the up and down arrows in the editor to put cuts (called blocks) in a more logical order

---

_[View the full topic](https://forums.maslowcnc.com/t/g-code-optimizers/3246)._